Removing The Cylinder Head; Removing The Cylinder; Removing The Piston; Removing The Ignition Cover - SHERCO 2015 450 SEF-R Workshop Manual

REMOVING THE ENGINE
❱❘ Removing the cylinder head
• Unscrew the cylinder head bolts following the
orderindicated in the picture.
• Remove the cylinder head by pulling it vertically.
• Remove the cylinder head gasket with caution.
❱❘ Removing the cylinder
• Remove the cylinder by it pulling vertically.
• Remove the cylinder gasket (1) carefully.
❱❘ Removing the piston
• Remove the securing clip (1) from the piston pin
and remove the piston pin (2).
• Remove the piston.
❱❘ Removing the ignition cover
• Remove the 4 screws (1) and remove
the ignition cover.
• Remove the ignition cover gasket with caution.
6
4
2 1
2
1
1
1
1
3
5
1
1
15