Gabarron ECOSSH158 Installation Instructions And User Manual page 11

MANUAL OVERRIDE
Increase temperature set point
STANDBY MODE
KEYBOARD LOCK
Lock / Unlock
GENERAL SETTINGS
In manual mode, the heater will maintain the temperature set point and will
ignore the pre-set program. SSH will maintain the selected temperature for the
24 hours of the day. Use this mode, when the same temperature is desired for
every hour in the week.
To modify the temperature set point, press
temperature is shown.
It is possible to put SSH in standby mode where the heater does not maintain
any set temperature or run any programs. It keeps the time settings configured
previously. When in this mode, the heater will display the current time and the
icon .
During any operation mode, it is possible to lock the keyboard by holding
and simultaneously for 3 seconds. When the keyboard is locked, the
message Lock will be displayed.
When the keyboard is locked, if any button is pressed, the display will show
"Lock" and the unit will not respond.
To unlock the keyboard, press
It is possible to modify the general setting. During any operation mode, press &
release , the display shows the flashing temperature symbol
symbol .
Hold for 5 seconds until the display shows UP01.
11
or until the desired
and simultaneously for 3 seconds.
and the RF