Mitsubishi Electric MELSERVO-JE MR-JE-70A Instruction Manual page 181

6. NORMAL GAIN ADJUSTMENT
(2) When you use push buttons
(a) Response mode selection
Select a response mode of the one-touch tuning from 3 modes with "UP" or "DOWN". Refer to (1) (a)
of this section for a guideline of response mode.
POINT
Push the "MODE" and "SET" buttons at the same time for 3 s or more to switch
to the response mode selection ("AUTO.") without going through the initial
screen of the one-touch tuning ("AUTO").
Response mode selection display
UP
Low mode: This mode is for low rigid system.
Basic mode: This mode is for standard system.
DOWN
High mode: This mode is for high rigid system.
6 - 10