Omron NX-SL series Instruction & Reference Manual page 264

4 Safety Function Blocks
DiagCode (hexadecimal)
8009
8019
4 - 134
DiagCode
Status name
(decimal)
32777 Locked Off
32793 Locked On
Status description and output results
The safety output was enabled and then disabled
again. After the safety output was disabled,
S_Button1 and S_Button2 did not both change to
FALSE. In this state, S_Button1 is TRUE and
S_Button2 is TRUE after the safety output is dis-
abled.
Ready = TRUE
Error = FALSE
S_TwoHandOut = FALSE
The button operation was not correct. The FB is
waiting for both buttons to be released.
Ready = TRUE
Error = FALSE
S_TwoHandOut = FALSE
NX-series Safety Control Unit Instructions Reference Manual (Z931)