Power Supply; Adjusting The Master Volume - Medeli Grand 510 Owner's Manual

aw_Grand510_Manual_G03_180408.pdf 13 18/4/8 15:07
1.
Before connecting the power supply, please set the [POWER] switch to
"OFF" and set the master volume level to minimum.
2.
Connect the AC power cable to AC power supply jack on the rear panel.
3.
Plug the AC power cable into an appropriate AC outlet.
4.
Press the [POWER] switch. The LCD will light up and display the
welcome interface, indicating the instrument is powered on.
5.
When you are ready to turn the instrument off, press and hold the
[POWER] switch for a second. The LCD light will turn off.
Notes:
1. In order to save energy, the instrument will automatically shut down after
30 minutes when not in use. (see Auto Power Off).
2. For your safety, please unplug the instrument when it is not in use or
during a thunderstorm.
C
M
Y
CM
MY
CY
CMY
K
Rotate the [VOLUME] knob clockwise to increase the master volume or
counter-clockwise to decrease it. Adjust to set the desired volume level.
Note:
If the speakers do not produce sound, check if the master volume is set too
low or if headphones are plugged into the PHONES jack.

Adjusting the Master Volume

Power Supply

13