Table of Contents
Advertisement
aw_DP420K_Manual_G03_151028.ai 10 2015/10/28 17:25:25
aw_DP420K_Manual_G03_151028.ai 10 2015/10/28 17:25:25
Quick Start
Power Supply
Make sure the instrument is powered off. Then turn down the
1.
volume.
Connect the AC adaptor to the DC IN jack of the instrument.
2.
3.
Plug the AC adaptor to an AC outlet.
Press and hold the [POWER] button, until the display shows "0.01",
4.
which indicates the instrument is powered on.
If you are ready to turn off the instrument, press and hold the
5.
[POWER] button until the display lights off.
Notes：
1. The instrument will automatically shut down after 30 minutes if it is
not used. To turn off the function, press and hold the key "A0" and
then turn on the power.
2. For your safety, please unplug the instrument when it is not in use or
during a thunderstorm.
Adjusting the Master Volume
C
Rotate the [VOLUME] knob clockwise to increase the master volume or
M
anticlockwise to decrease it. You can use the knob to set the desired
Y
volume level.
CM
Note:
MY
If the keyboard keeps silent, check if the volume is set to minimum or
CY
headphones are plugged into Jack 2.
CMY
K
Adjusting the Voice Brilliance
Rotate the [BRILLIANCE] knob clockwise to make the voice sounds
brighter, or anticlockwise to make it sounds mellow. You can use the
knob to set the desired brilliance level.
Playing the Demo Songs
The instrument features a number of wonderful demo songs. Please
refer to the Demo List.
1.
Press both the [STYLE] and [SONG] buttons simultaneously to
enter the demo mode. It will play all demo songs in a loop. The
display shows the current demo number.
2.
Use the [+/YES]/[-/NO] button to select a demo song.
3.
Press the [START/STOP] button to stop and exit the demo mode. Or
press again both the [STYLE] and [SONG] buttons to stop and exit
the demo mode.
10
Advertisement
Table of Contents
