Connections - Medeli Grand 510 Owner's Manual

aw_Grand510_Manual_G03_180408.pdf 11 18/4/8 15:07
1
C
1. PEDAL JACK
M
Connect the pedal component.
Y
2. MIDI OUT, MIDI IN, MIDI THRU Jacks
CM
Use a standard MIDI cable to connect the MIDI OUT jack
MY of the instrument to the MIDI IN jack of an external device.
The instrument will transmit MIDI messages to the
CY
external device and work as a MIDI controller.
CMY
Use a standard MIDI cable to connect the MIDI IN jack of
K
the instrument to the MIDI OUT jack of an external device.
The instrument will receive MIDI messages from the
external device and work as a sound source.
Use a standard MIDI cable to connect the MIDI THRU jack
of the instrument to the MIDI IN jack of an external device.
The instrument will relay the MIDI messages it has
received from its MIDI IN to the next device.
3. USB Jack
Use a standard USB cable to connect the USB jack of the
instrument to the USB port of a computer. With USB, you
can save a keyboard performance to the computer or use
the instrument to play back music played on the computer.
Note:
Do not set the USB MIDI device to be both input and
output simultaneously when configuring the software on
your computer. Otherwise, the sound will be overlapped
when playing the keyboard.
2 3 4 5 6 7
4. MIC Jack
Before connecting or disconnecting a microphone, set the
master volume level to minimum. Plug the microphone
into the MIC jack, then adjust the master volume to an
appropriate level.
Note:
Please unplug the microphone when it is not in use.
5. MIC Volume Knob
Rotate it to adjust the input volume of the microphone.
6. AUX IN Jack
The AUX IN jacks receive audio signals from an external
audio source such as an MP3 or a CD player. Connect the
AUX IN jacks of the instrument to the OUTPUT jack of an
MP3/CD player. The instrument's speakers will play the
music transmitted from the external player, and you can
play along.
7. AUX OUT Jack
The AUX OUT jacks deliver the output of the instrument to
external audio equipment such as a keyboard amplifier,
stereo sound system, mixing console, or recording
interface. Connect the AUX OUT jacks of the instrument to
the INPUT jack of the external audio equipment. Use the
R and L jacks for stereo output or just the L jack for mono
output.
Notes:
1. Turn off the power to all devices before connecting or
disconnecting external equipment.
2. To avoid damaging the speakers, set the master volume
level to minimum before turning on the power.
8. AC POWER INLET
Connect the AC power cable to this inlet.

Connections

8
11