Medeli Grand 510 Owner's Manual page 6

aw_Grand510_Manual_G03_180408.pdf 6 18/4/8 15:07
Setup
B. Put the Left leg component (C) on the left side of the Piano body (E). Then align the sunken hole on the Leg component
to that on the Piano body.
Place a washer into this sunken hole, then use the Wrench (J) to securely tighten the Hexagonal bolt (G)(2 on each side)
in clockwise direction, as shown in the picture. (Make sure the direction of the components is correct before screwing)
Affix the Right leg component (B) and Rear leg component (D) to the Piano body (E) in the same way.
C
M
Y
CM
MY
CY
CMY
How to screw a hexagonal bolt?
K
a. Put a Washer into the sunken hole on the leg component.
b. Put a hexagonal bolt into the sunken hole.
c. Use the Wrench to tighten the bolt in clockwise direction.
06
Wrench/hexagonal bolt spanner
Hexagonal bolt
Washer