Setup; Setting A Music Stand; Power Supply - Medeli SP3000 Onwers Manual

aw_SP3000_Manual_G04_150723.ai 6 2015/7/23 11:20:05 aw_SP3000_Manual_G04_150723.ai 6 2015/7/23 11:20:05

Setup

This section contains information about setting up your instrument
and preparing to play. Please go through this section carefully before
turning the power on.

Setting a Music Stand

Follow the images on the right, and install the music stand correctly.
A music stand is supplied with the keyboard. You can easily attach it to
the instrument by inserting it into the slots at the rear of the panel.

Power Supply

1.
Make sure that the piano is turned off. Before you switch your
piano on or off, turn down the volume of piano and any connected
audio equipments first.
2.
Connect the AC adaptor to the power supply jack of this piano.
C
3.
Plug the AC adaptor into an AC outlet.
M
Y
4.
Press the POWER switch, the nixie tube displays"0.01", which
CM indicates the piano is power on.
MY
5.
If you are ready to turn off the piano, please long press the
CY
POWER switch.
CMY
K
Note：
1. In order to save energy, we have designed the "Automatic
Shutdown" function to the piano. With this function, the keyboard
will automatically shutdown in 30 minutes later if you do not take
any action on the piano. If you don't need this feature, just press
and hold the [A0] key (the 1st key) and turn it on.
2. When the piano is not in use or during thunderstorm, please
disconnect the power for safety purpose.
06
USB MIDI OUT SUSTAIN AUX IN AUX OUT