Add A Port Triggering Service - NETGEAR Orbi RBR50 User Manual

Wifi system
Hide thumbs Also See for Orbi RBR50:
Table of Contents

Advertisement

An application must use port forwarding to more than one local computer (but not simultaneously).
An application must open incoming ports that are different from the outgoing port.
With port triggering, the router monitors traffic to the Internet from an outbound "trigger" port that you specify.
For outbound traffic from that port, the router saves the IP address of the computer that sent the traffic. The
router temporarily opens the incoming port or ports that you specify in your rule and forwards that incoming
traffic to that destination.
Port forwarding creates a static mapping of a port number or range of ports to a single local computer. Port
triggering can dynamically open ports to any computer when needed and close the ports when they are no
longer needed.

Add a Port Triggering Service

To add a port triggering service:
1.
Launch a web browser from a computer or mobile device that is connected to your Orbi network.
2.
Enter orbilogin.com.
A login window opens.
3.
Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time that you logged in.
The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
The Port Forwarding/Port Triggering page displays.
5.
Select the Port Triggering radio button.
The page adjusts.
6.
Click the Add Service button.
The Port Triggering - Services page displays.
7.
In the Service Name field, type a descriptive service name.
8.
In the Service User menu, select Any, or select Single address and enter the IP address of one
computer:
Any (the default) allows any computer on the Internet to use this service.
Single address restricts the service to a particular computer.
9.
Select the service type, either TCP or UDP or TCP/UDP (both).
If you are not sure, select TCP/UDP.
10.
In the Triggering Port field, enter the number of the outbound traffic port that will open the inbound
ports.
Orbi WiFi System
Customize Internet Traffic Rules for Ports
109

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents