Add A Port Triggering Service - NETGEAR 8NE10325070 User Manual

Add a port triggering service

To add a port triggering service:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
The Port Forwarding / Port Triggering page displays.
5. Select the Port Triggering radio button.
The page adjusts.
6. Click the Add Service button.
The Port Triggering - Services page displays.
7. In the Service Name field, type a descriptive service name.
8. From the Service User menu, select a user option:
• Any: This is the default setting and allows any computer on the Internet to use
this service.
• Single address: Restricts the service to a particular computer. Enter the IP address
in the fields, which become available with this selection from the menu.
9. From the Service Type menu, select the protocol (TCP or UDP) that is associated
with the service or application.
10. In the Triggering Port field, enter the number of the outbound traffic port that must
open the inbound ports.
11. From the Connection Type menu, select the protocol (TCP or UDP) that is associated
with the inbound connection.
If you are unsure, select TCP/UDP.
12. In the Starting Port and Ending Port fields, enter the enter the numbers of the
inbound traffic ports.
13. Click the Apply button.
Manage Port Forwarding and
Port Triggering
4-Stream AX1800 WiFi 6 Router Model RAX10
130 User Manual