Your settings are saved.
16.
Click the Test button to test your Internet connection.
If the NETGEAR website does not display within one minute, see
124.
Specify IPv6 Internet Connections
You can set up an IPv6 Internet connection if genie does not detect it automatically.
To set up an IPv6 Internet connection:
1.
Launch a web browser from a computer or mobile device that is connected to your Orbi network.
2.
Enter orbilogin.com.
A login window opens.
3.
Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time that you logged in.
The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > IPv6.
The IPv6 page displays.
5.
From the Internet Connection Type menu, select the IPv6 connection type:
•
If you are not sure, select Auto Detect so that the router detects the IPv6 type that is in use.
•
If your Internet connection does not use PPPoE, DHCP, or fixed, but is IPv6, select Auto Config.
Your Internet service provider (ISP) can provide this information. For more information about IPv6
Internet connection, see the following sections:
•
Use Auto Detect for an IPv6 Internet Connection
•
Use Auto Config for an IPV6 Internet Connection
•
Set Up an IPv6 6rd Tunnel Internet Connection
•
Set Up an IPv6 6to4 Tunnel Internet Connection
•
Set Up an IPv6 Pass Through Internet Connection
•
Set Up an IPv6 Fixed Internet Connection
•
Set Up an IPv6 DHCP Internet Connection
•
Set Up an IPv6 PPPoE Internet Connection
6.
Click the Apply button.
Your settings are saved.
Orbi WiFi System
on page 40
on page 41
on page 42
on page 43
on page 44
on page 45
on page 46
on page 47
Specify Your Internet Settings
39
Cannot Access the Internet
on page