Factory Settings For Orbi Routers; Factory Settings For Orbi Router Model Rbr50 - NETGEAR Orbi RBR50 User Manual

Factory Settings for Orbi Routers

You can return the router to its factory settings. Use the end of a paper clip or a similar object to press and
hold the Reset button on the back of the router for at least seven seconds. The router resets, and returns
to the factory settings.

Factory Settings for Orbi Router Model RBR50

The following table shows the factory default settings for the router.
Table 4. Factory default settings for the router
Feature
Router User login URL
login
User name (case-sensitive)
Login password
(case-sensitive)
Internet WAN MAC address
connection
WAN MTU size
Port speed
Local LAN IP
network
Subnet mask
(LAN)
DHCP server
DHCP range
DHCP starting IP address
DHCP ending IP address
DMZ
Time zone
Time zone adjusted for
daylight saving time
SNMP
Firewall Inbound (communications
coming in from the Internet)
Outbound (communications
going out to the Internet)
Source MAC filtering
Orbi WiFi System
Default Setting
orbilogin.com
admin
password
Use default hardware address
1500
AutoSensing
192.168.1.1
255.255.255.0
Enabled
192.168.1.2 to 192.168.1.254
192.168.1.2
192.168.1.254
Disabled
GMT for WW except NA and GR,
GMT+1 for GR, GMT-8 for NA
Disabled
Disabled
Disabled (except traffic on port 80,
the HTTP port)
Enabled (all)
Disabled
Supplemental Information
131