Place Your Satellite; Examples Of Placement For One Satellite - NETGEAR Orbi RBR50 User Manual

3. Connect your modem to the Internet port of your router with the yellow Ethernet cable that came with
your router.
The router shown in this is the Orbi router (model RBR50). The same setup applies to all Orbi routers.
4. Connect the power adapter to your router and plug the power adapter into an outlet.
5. If the Power LED does not light, press the Power On/Off button on the rear panel of the router.

Place Your Satellite

If your satellite came with your Orbi WiFi System, the satellite attempts to sync with your router. If you bought
an add-on satellite, you must manually sync your satellite. For more information, see
on page 24.
Note that your satellites must be within range of your router's WiFi signal in order for it to sync with the
router. Use each satellite's ring LED to help you determine where to place your satellite.

Examples of Placement for One Satellite

The following images are examples of where to place your router and satellite. The router shown in the
following images is the Orbi router model RBR50 and the satellite shown in the images is the Orbi satellite
model RBS50.
Orbi WiFi System
Overview
20
Sync Your Orbi Satellite