Update The Router And Satellite Firmware; Check For Firmware Updates; Manually Update Firmware - NETGEAR Orbi RBR50 User Manual

Update the Router and Satellite Firmware

You can use the router web interface to check if new firmware is available and update your router and
satellite, or you can manually update the firmware for your router and satellite.

Check for Firmware Updates

To check for new firmware and update your router and satellite:
1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time that you logged in.
The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Firmware Update.
The Firmware Update page displays.
5. Click the Check button.
The router checks to see if new firmware is available for the router and satellite.
6. If new firmware is available, click the Update All button.
The router locates and downloads the firmware for the router and satellite and begins the update.
Note To avoid the risk of corrupting the firmware, do not interrupt the upgrade. For example,
do not close the browser, click a link, or load a new page. Do not turn off the router
or satellite.
When the upload is complete, your router and satellite restart. The update process typically takes about
one minute. Read the new firmware release notes to find out if you must reconfigure the router after
updating.

Manually Update Firmware

If a satellite is connected to your router, you can log in to the router to manually upload the firmware on your
satellite.
WARNING:
We recommend that you always update the firmware on your satellite first,
and then update your router. Also, do not update the firmware on your router
and satellite at the same time.
Orbi WiFi System
Manage Your Network
86