Manage The Router Configuration File; Back Up Settings - NETGEAR Orbi RBR50 User Manual
Wifi system
Hide thumbs
Also See for Orbi RBR50:
- User manual (164 pages) ,
- Quick start quide (2 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
-
No Limit. No restriction is applied when the traffic limit is reached.
-
Download only. The restriction is applied to incoming traffic only.
-
Both Directions. The restriction is applied to both incoming and outgoing traffic.
•
Select the Connection time control radio button and enter the allowed hours in the Monthly limit
field.
7.
If your ISP charges for extra data volume when you make a new connection, enter the extra data volume
in MB in the Round up data volume for each connection by field.
8.
In the Traffic Counter section, set the traffic counter to begin at a specific time and date.
To start the traffic counter immediately, click the Restart Counter Now button.
9.
If you want the router to issue a warning message before the monthly limit of Mbytes or hours is reached,
in the Traffic Control section, enter a numeric value.
By default, the value is 0 and no warning message is issued.
10.
To stop the Internet connection when the limit is attained, select the Disconnect and disable the
Internet connection check box.
11.
Click the Apply button.
The Internet Traffic Statistics section helps you to monitor the data traffic.
12.
To update the Internet Traffic Statistics section, click the Refresh button.
13.
To display more information about the data traffic on your router and to change the poll interval, click
the Internet Traffic Status button.
Manage the Router Configuration File
The configuration settings of the router are stored within the router in a configuration file. You can back up
(save) this file to your computer, restore it, or reset it to the factory default settings.
Back Up Settings
To back up the router's configuration settings:
1.
Launch a web browser from a computer or mobile device that is connected to your Orbi network.
2.
Enter orbilogin.com.
A login window opens.
3.
Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time that you logged in.
The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Administration > Backup Settings.
The Backup Settings page displays.
Orbi WiFi System
Manage Your Network
100
Hide quick links:
Advertisement
Table of Contents
