Generate A New Backhaul Password; Set Up A Bridge For A Port Group Or Vlan Tag Group - NETGEAR Orbi RBR50 User Manual

Note To avoid interference with other routers or gateways in your network, we recommend
that you use different WiFi settings on each router. You can also turn off the WiFi
radio on the other router or gateway and use the Orbi only for WiFi client access.
8. Click the Apply button.
The IP address of the router changes, and you are disconnected.
9. To reconnect, close and restart your browser and enter orbilogin.com.

Generate a New Backhaul Password

The backhaul password is a security key that is used in WiFi communication between the router and the
satellite. You can generate a new backhaul password. After you generate a new backhaul password, you
must use the Sync button to build a new backhaul connection so that the router and satellite can communicate
with each other using WiFi.
To generate a new backhaul password:
1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time that you logged in.
The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Advanced Wireless Settings page displays.
5. In the Backhaul Password section, click the GENERATE button.
The router generates a new backhaul password.

Set Up a Bridge for a Port Group or VLAN Tag Group

This feature is available only in Singapore.
Some devices, such as an IPTV, cannot function behind the router's Network Address Translation (NAT)
service or firewall. Based on what your Internet service provider (ISP) requires, for the device to connect to
the ISP's network directly, you can enable the bridge between the device and the router's Internet port or
add new VLAN tag groups to the bridge.
Note If your ISP provides directions on how to set up a bridge for IPTV and Internet service,
follow those directions.
Orbi WiFi System
Specify Network Settings
80