Factory Settings For Orbi Satellites; Factory Settings For Orbi Satellite Model Rbs50 - NETGEAR Orbi RBR50 User Manual

Table 6. Factory default settings for the router (Continued)
Feature
WiFi WiFi communication
SSID name
Security
Broadcast SSID
Transmission speed
Country/region
RF channel
3
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network
overhead, lower actual data throughput rate.

Factory Settings for Orbi Satellites

You can return the satellite to its factory settings. Use the end of a paper clip or a similar object to press
and hold the Reset button on the back of the satellite for at least seven seconds. The satellite resets, and
returns to the factory settings.

Factory Settings for Orbi Satellite Model RBS50

The following table shows the factory default settings for the satellite.
Orbi WiFi System
Default Setting
Enabled
See router label
WPA2-PSK (AES)
Enabled
3
Auto
United States in the US; otherwise,
varies by region
2.4 GHz front and back haul: Auto
5 GHz front haul:
• Channel 48 for NA, PR, AU,
CA, and TW
• Channel 36 for EU, KO, JP,
and IN
5 GHz back haul:
• Channel 157 for NA, PR, AU,
CA, and TW
• Channel 108 for EU, KO, JP,
and IN
Supplemental Information
136