Appendix A: Installation/Assembly Safety Instructions - Intel A1U2ULCP Technical Product Specification

Intel® Local Control Panel for EPSD Platforms TPS

Appendix A: Installation/Assembly Safety Instructions

Observe the following safety guidelines:

Do not operate your computer system with any cover(s) (such as computer covers,
bezels, filler brackets, and front-panel inserts) removed.

To help avoid damaging your computer, be sure the voltage selection switch on the
power supply is set to match the alternating current (AC) power available at your
location.

To help avoid possible damage to the server board, wait five seconds after turning off
the system before removing a component from the server board or disconnecting a
peripheral device from the computer.

To help prevent electric shock, plug the computer and peripheral power cables into
properly grounded power sources. These cables are equipped with three-prong plugs to
ensure proper grounding. Do not use adapter plugs or remove the grounding prong from
a cable. If you must use an extension cable, use a three-wire cable with properly
grounded plugs.

To help protect your computer system from sudden, transient increases and decreases
in electrical power, use a surge suppressor, line conditioner, or uninterruptible power
supply.

Be sure nothing rests on your computer system's cables and that the cables are not
located where they can be stepped on or tripped over.

Do not spill food or liquids on your computer. If the computer gets wet, refer the
documentation that came with it.

Do not push any objects into the openings of your computer. Doing so can cause fire or
electric shock by shorting out interior components.

Keep your computer away from radiators and heat sources. Also, do not block cooling
vents. Avoid placing loose papers underneath your computer; do not place your
computer in a closed-in wall unit or on a rug.
When working on the inside of your computer:

Do not attempt to service the computer system yourself, except as explained in this
guide and elsewhere in Intel
instructions closely.

Turn off your computer and any peripherals.

Disconnect your computer and peripherals from their power sources. Also disconnect
any telephone or telecommunications lines from the computer.
Doing so reduces the potential for personal injury or shock.
Revision 1.0
Appendix A: Installation/Assembly Safety Instructions
®
documentation. Always follow installation and service
Intel order number G83726-001 27