11
LUBRICATION
LUBRICATION
11.4 MACHINE
Before using the machine for the first time, lubricate
the following points using an greese gun and
recommended greese:
Cutting cylinder bearings (A Fig. 11.4a)
Landroll clutch (A Fig. 11.5b)
Landroll (A Fig. 11.5c)
Front roll spindle
In addition to the above, oil all linkages, drive chains
and pivot points etc.
NOTE. To gain access to the landroll clutch and
drive it is necessary to remove the chain case cover.
Daily (Every 8 working hours)
Lubricate as above.
SAFETY, OPERATORS, MAINTENANCE AND PARTS MANUAL
RANSOMES SMALL PEDESTRIAN RANGE
Fig. 11.4a
Fig. 11.4b
Fig. 11.4c
GB-33