Cylinder Clutch Lever; Ignition Cut-Out Switch; Brake Release Lever - Ransomes Super Certes 51 Maintenance And Parts Manual

6 CONTROLS
6.3 BRAKE RELEASE LEVER (D Fig.2)
The landroll brake is applied when the hand lever is
moved to its upper position. To fully release the
landroll brake move the hand lever downwards and
pull the machine backwards.
WARNING
FOR THE SUPER CERTES ONLY:
THIS MACHINE SHOULD NOT BE PARKED
ON A SLOPE WITHOUT THE TRANSPORT
WHEELS FITTED.
6.4 CYLINDER CLUTCH LEVER (A Fig. 6.4)
The cylinder clutch is engaged by moving the lever
downwards and disengaged by moving the lever
upwards.

6.5 IGNITION CUT-OUT SWITCH

(A Fig. 6.5)
The ignition switch is located on the front of the
engine. The engine ignition is switched on by moving
the lever to the '1' position. To stop the engine
close the throttle and move the switch to the '0'
position.
GB-14
SAFETY, OPERATORS, MAINTENANCE AND PARTS MANUAL
RANSOMES SMALL PEDESTRIAN RANGE
Fig. 6.3
Fig. 6.4
Fig. 6.5