6
CONTROLS
6.1A OPERATOR PRESENCE CONTROL -
MECHANICAL (OPC) (Fig. 6.1A.1)
By depressing button B Lever A can be operated
thereby engaging forward drive and cylinder rotation
(Cylinder will only rotate if Cylinder clutch is
engaged see 6.4).
When handle A is released, button B will spring
back into position, blocking the operation of Lever A.
6.1B LANDROLL CLUTCH
Pulling lever A (Fig. 6.1B.1) towards the grip will
disengage the landroll clutch allowing the machine
to be pulled easily backwards when in confined
areas. This control is located on the left hand side of
the machine.
GB-12
SAFETY, OPERATORS, MAINTENANCE AND PARTS MANUAL
RANSOMES SMALL PEDESTRIAN RANGE
Fig.6.1A.1
Fig.6.1B.1