How To Use The Parts Manual - Ransomes Super Certes 51 Maintenance And Parts Manual

2 INTRODUCTION
2.3

HOW TO USE THE PARTS MANUAL

ITEM NUMBER
Each part which is identified in the illustrations has an item number. Parts which do not have an item number may not be
readily identified in the illustration but are usually closely associated with the immediately adjacent part.
ASSEMBLIES
A complete assembly, e.g. a wheel motor or hydraulic motor or roll assembly, is listed as a complete item with
subsequent individual components listed separately.
The assembly is listed under it's part number with component parts being listed offset to the right, e.g.:-
ITEM RANSOMES
PART NO.
1 LMSD798
2 MBB4490
3 LMSD926
4 MBB6851
5 H009116
6 MBB2356
7 A224016
* A122192
It may not be possible to illustrate every item. With certain items purchased from outside suppliers some component
parts may not be available from Ransomes and may need to be specially ordered from the supplier.
QUANTITIES
Quantities shown are for one assembly or sub-assembly.
USING THE PARTS LIST
Determine the function and application of the part required. Turn to the main index page and select the appropriate
section. Locate the part on the illustration and parts list and read off the quantity from the appropriate MODEL column.
NUMERICAL INDEX
This is a summary of all part numbers used in the manual arranged in numerical sequence and showing the page and
item number under which the parts appear.
ORDERING OF SPARE PARTS
When ordering replacement parts, it is most important to quote the SERIAL NUMBER of the machine, PART NUMBER,
DESCRIPTION and QUANTITY required.
Any arbitrary modifications carried out on this machine may relieve the manufacturer of liability for any
resulting damage or injury.
ABBREVIATIONS
N/A Not Available
AR As Required
SAFETY, OPERATORS, MAINTENANCE AND PARTS MANUAL
DESCRIPTION
Roll Assy.
• Tube
• End Cap Assy.
• • End Cap
• • Bearing
• Seal Housing
• Seal
Screw
RANSOMES SMALL PEDESTRIAN RANGE
QTY REMARKS
1 ALL MACHINES
1
2
1
1
1
2
2
GB-5