Controls; Operator Presence Control - Mechanical (Opc); Landroll Clutch; Throttle Control - Ransomes Super Certes 51 Safety, Operation & Maintenance Manual

6.1

OPERATOR PRESENCE CONTROL - MECHANICAL (OPC)__________________

The OPC control is on the right-side handle bar. To
operate, press the button [B) and pull the lever [A] to
engage the drive. To disengage the OPC, release lever
[A]. Button [B] will spring into position and prevent the
operation of Lever [A]. Forward drive will stop.
6.2

LANDROLL CLUTCH _________________________________________________

This control is on the left-side of the handle bar. To oper-
ate, pull the lever [C] the clutch is disengaged. When the
landroll clutch is disengaged, the machine can be moved
manually.
6.3

THROTTLE CONTROL ________________________________________________

To change the cutting speed, use the hand lever [E].To
increase the engine turns, move the hand lever [E] down.
To decrease the engine turns, return the hand lever [E] to
the Low Idle position.

6 CONTROLS

D
C
E
B
A
en-27