Standard Folding Of Standard Paper; Standard Paper; Standard Folding Modes - Duplo DF-1000 Instruction Manual

1. STANDARD FOLDING OF STANDARD PAPER

1-1. Standard Paper

There are six types of standard paper sizes; A3, B4, A4, B5, A5, and B6. All these sizes are
detected as standard paper only when stacked in the short edge feeding direction (direction
shown in the figure).
For A4 and B5 sizes, these can be
used as non-standard paper even
when stacked in the long edge feeding
direction. (Refer to Chapter 3 APPLIED
USE "1. STANDARD FOLDING OF
NON-STANDARD PAPER" (
Table of paper stacking direction
Stacking
direction
A3 B4
×
When stacking paper on the paper feed tray, take note of the front/back, top/end of the
paper.
Because the relations between the folding misalignment state and the front/back, top/
end of the paper must also be taken into consideration when checking the finish by test
folding.
<Example> When paper (front is gray and back is white) is stacked on the paper feed tray as
shown and finished in the following standard folding modes
Paper stacked on
paper feed tray

1-2. Standard Folding Modes

There are five types of standard folding modes; single fold, double fold, irregular accordion
fold, letter fold, and accordion fold.
2-2
p.3-2).)
Paper size
A4 B5 A5
× ×
Paper feed direction
<Irregular accordion fold>
Single Double
fold fold
Paper
B6
: Can be used as standard paper
: Can be used as non-standard paper
×
: Cannot be used
×
<Single fold>
Ejection
direction
<Letter fold>
Irregular Letter
accordion fold fold
<Double fold>
<Accordion fold>
Accordion
fold