Standard Folding Of Standard Paper; Standard Paper; Standard Folding Modes; Operation Procedure - Duplo DF-920 Instruction Manual

9. STANDARD FOLDING OF STANDARD PAPER

Standard folding of standard paper is the basic operation of this unit.

9-1. Standard Paper

The standard paper designated by this unit
consists of the following five types: LGR, LGL,
LTR, STMT, and INV.
All of these sizes are valid only when stacked
on the paper feed tray in the short edge
feeding direction.
The above standard paper may not be usable for
Note Note
certain paper thickness in some cases.
(Refer to "22. SPECIFICATIONS" (

9-2. Standard Folding Modes

Six standard folding modes are available as shown below.
Single fold

9-3. Operation Procedure

1
Turn on the power switch.
WARNING
!
Do not touch the power switch with
wet hands. Otherwise electric
hazards may occur.
2
Stack paper on the paper feed tray.
Do not overstack paper. Paper can be stacked up to a
height of approx. 1.8".
Push in the paper until the lead edge touches the
paper feed inlet lightly.
22
p.59).)
Double fold Irregular
accordion fold
Paper size
Ledger (LGR)
Legal (LGL)
Letter (LTR)
Statement (STMT)
Invoice (INV)
Letter fold Accordion
fold
Max. stacking amount: Approx. 1.8"
L × W
17" × 11"
14" × 8.5"
11" × 8.5"
8.5" × 7"
8.5" × 5.5"
Brochure
fold
Power switch
ON
OFF