Configuring The Auxiliary Line - Cisco 2800 Series Manual

Hide thumbs Also See for 2800 Series:
Table of Contents

Advertisement

How to Perform a Basic Software Configuration Using the Cisco IOS CLI
Command or Action
Step 7
show running-config
Example:
Router# show running-config
Step 8
From another network device, attempt to open a Telnet
session to the router.
Example:
Router# 172.16.74.3
Password:
Examples
The following example shows how to configure virtual terminal lines with a password:
!
line vty 0 4
password guessagain
login
!
What to Do Next
After you configure the vty lines, follow these steps:

Configuring the Auxiliary Line

This section describes how to enter line configuration mode for the auxiliary line. How you configure
the auxiliary line depends on your particular implementation of the auxiliary (AUX) port. See the
following documents for information on configuring the auxiliary line:
Configuring a Modem on the AUX Port for EXEC Dialin Connectivity, tech note
http://www.cisco.com/warp/public/471/mod-aux-exec.html
Configuring Dialout Using a Modem on the AUX Port, sample configuration
http://www.cisco.com/warp/public/471/mod-aux-dialout.html
Connecting a SLIP/PPP Device to a Router's AUX Port, tech note
http://www.cisco.com/warp/public/701/6.html
Basic Software Configuration Using the Cisco IOS Command-Line Interface
14
(Optional) To encrypt the virtual terminal line password, see the "Configuring Passwords and
Privileges" chapter in the Cisco IOS Security Configuration Guide. Also see the
Password Encryption Facts
(Optional) To secure the VTY lines with an access list, see "Part 3: Traffic Filtering and Firewalls"
in the Cisco IOS Security Configuration Guide.
To continue with the basic software configuration for your router, proceed to the
Auxiliary Line" section on page
Purpose
Displays the running configuration file.
Verify that you properly configured the virtual terminal
lines for remote access.
Verifies that you can remotely access the router and that the
virtual terminal line password is correctly configured.
tech note.
14.
Cisco IOS
"Configuring the
OL-5593-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents