Cisco 2800 Series Manual page 69

Secured Branch Router Configuration Example
!---Configure the firewall interface that connects to the branch office PCs
!---and the Firewall Websense UFS:
!---Apply access lists and inspection rules to control access to the interface.
!---In this example, access list 116 is used to filter outbound packets, and
!---the inspection rule named "myfw" is used to filter inbound packets.
!---Enable the authentication proxy rule for dynamic, per-user authentication
!---and authorization. See the previous "aaa authorization auth-proxy default group SJ"
!---and "ip auth-proxy name aprule http" command entries.
!---Apply the Cisco IPS rule to outbound traffic.
interface FastEthernet0/0
ip address 192.168.1.2 255.255.255.0
ip access-group 116 out
ip inspect myfw in
ip auth-proxy aprule
ip ips ids-policy out
.
.
.
!---Configure the interface that connects to the
!---Cisco Secure Authentication Control Server (Cisco Secure ACS).
!---Apply access lists to control access to the interface.
!---In this example, access list 111 is used to filter inbound packets.
interface FastEthernet0/1
ip address 192.168.101.2 255.255.255.0
ip access-group 111 in
.
.
.
ip classless
!---The following command establishes a static route to the HTTP server,
!---which in this example has an IP address of 192.168.102.119.
ip route 192.168.102.0 255.255.255.0 FastEthernet0/1
!
!---Enable the HTTP server on your system.
!---Also, specify that the authentication method used for AAA login service
!---should be used for authenticating HTTP server users.
ip http server
ip http authentication aaa
no ip http secure-server
!
!---Configure the access list for the interface that connects to the
!---Cisco Secure ACS.
access-list 111 permit tcp host 192.168.101.119 eq tacacs host 192.168.101.2
access-list 111 permit udp host 192.168.101.119 eq tacacs host 192.168.101.2
access-list 111 permit icmp any any
access-list 111 deny
!
!---Configure the access list for the firewall interface that connects to the
!---branch office PCs and the Websense URL Filtering Server (UFS).
access-list 116 permit tcp host 192.168.1.118 host 192.168.1.2 eq www
access-list 116 deny
access-list 116 deny
access-list 116 deny
access-list 116 permit tcp 192.168.1.0 0.0.0.255 any
access-list 116 permit udp 192.168.1.0 0.0.0.255 any
access-list 116 permit icmp 192.168.1.0 0.0.0.255 any
!
!
ip any any
tcp host 192.168.1.118 any
udp host 192.168.1.118 any
icmp host 192.168.1.118 any
Configure
OL-6329-01
5