Cisco 2800 Series Manual page 262

Additional References
Router# copy flash: tftp:
IP address of remote host [255.255.255.255]? 192.0.0.1
filename to write on tftp host? c2800-image-mz
writing c2800-image-mz !!!!...
successful ftp write.
Additional References
The following sections provide references related to upgrading the system image on your router.
Related Documents and Websites
Related Topic
Matching Cisco IOS releases and features to hardware Cisco Feature Navigator at
Choosing the Cisco IOS release and feature set
Downloading system images
Displaying minimum DRAM and flash memory
requirements
Choosing and downloading system images
Loading and maintaining system images
Using external compact flash memory cards
Removing, inserting, and upgrading compact flash
memory cards
Connecting your PC to the router console port
Upgrading the system image on similar routers
Verifying that the router and the server are on the same
network
Troubleshooting while using TFTP or RCP to copy the
system image into flash memory
Using the ROM monitor
Using console download (xmodem) in the ROM
monitor to copy the system image into flash memory
Upgrading the system image from boot mode
1. You must have an account on Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at the login dialog
box and follow the instructions that appear.
OL-5595-01
24
Document Title or Website
How to Choose a Cisco IOS Software Release
Download Software Area at
http://www.cisco.com/kobayashi/sw-center/index.shtml
Software Center at
http://www.cisco.com/kobayashi/sw-center/index.shtml
Cisco IOS Configuration Fundamentals and Network Management
Configuration Guide
Using Compact Flash Memory Cards
hardware installation guide for your router
quick start guide for your router
Software Installation and Upgrade Procedure
Determining IP Addresses: Frequently Asked Questions
Common Problems in Installing Images Using TFTP or an RCP
Server
Using the ROM Monitor
Xmodem Console Download Procedure Using ROMmon
How to Upgrade from ROMmon Using the Boot Image
Upgrading the System Image
http://www.cisco.com/go/fn
1
1