Installation
The dimensions of the 4 bracket mounting holes on the back panel are VESA MIS-
Fcompliant (TT-8618VN or TT-7518VN: 800 x 400 mm/31.50 x 15.75 in; TT-6518VN:
600 x 400 mm/23.62 x 15.75 in). Please use metric M8 screws with length of 10
to 15 mm (0.40 to 0.59 in) to secure the touch display with the mounting system.
Dimensions of the mounting holes on the back panel are shown in the following
figure.
Note
Please consult a professional installer to install the display product.
● TT-8618VN/TT-7518VN
● TT-6518VN
800 mm (31.5 in)
M8
M8
600 mm (23.62 in)
M8
M8
13
M8
M8
M8
M8