5
Using the Module
Instrument Controls
Main menu bar
To change the current settings, use the arrow keys to navigate across the
interactive menu bar until the desired option is flashing. Using the
up/down arrow keys alter the parameter to the desired setting.
When the cursor is located in the "Home" position, the actual detector
values are displayed in the main screen. If the instrument is controlled via
PC software, then the home key will display a locked icon
keypad will be disabled. To unlock the keypad, software control must be
terminated.
Sub-Menu Screen
The sub- menu screen is accessed from the front screen by selecting the ↓
key: This screen allows changes to the following electronic parameters:
SMTH
PWR MODE
HZ
LAN
Figure 8
52
Set Time Constant
Set Mode of ELSD when powered up
Set Data Output Rate
Displays the instruments TCP/IP settings
With serial connection option displays "Instrument Configured for RS-232"
G7102A sub menu screen
Agilent 1290 Infinity II ELSD User Manual
and the