Cautions and Warnings
The module is partially energized when switched off, as long as the power cord is
WA R N I N G
plugged in.
Repair work at the module can lead to personal injuries, e.g. electrical shock, when
the cover is opened and the module is connected to power.
➔
➔
Toxic, flammable and hazardous solvents, samples and reagents
WA R N I N G
The handling of solvents, samples and reagents can hold health and safety risks.
➔
➔
➔
Fire and damage to the module
WA R N I N G
Wrong fuses
➔
➔
Electronic boards and components are sensitive to electrostatic discharge (ESD).
C A U T I O N
ESD can damage electronic boards and components.
➔
Agilent 1290 Infinity II ELSD User Manual
Always unplug the power cable before opening the cover.
Do not connect the power cable to the instrument while the covers are removed.
When working with these substances observe appropriate safety procedures (for
example by wearing goggles, safety gloves and protective clothing) as described in
the material handling and safety data sheet supplied by the vendor, and follow good
laboratory practice.
The volume of substances should be reduced to the minimum required for the
analysis.
Do not operate the instrument in an explosive atmosphere.
Make sure that only fuses with the required rated current and of the specified type
(super-fast, fast, time delay etc) are used for replacement.
The use of repaired fuses and the short-circuiting of fuse-holders must be avoided.
Be sure to hold the board by the edges, and do not touch the electrical components.
Always use ESD protection (for example, an ESD wrist strap) when handling
electronic boards and components.
Maintenance
Cautions and Warnings
9
97