Agilent Technologies 1290 Infinity II User Manual page 42

4
LAN Configuration
TCP/IP Parameter Configuration
Table 6
Value
set network ?
set network
set network ip=<x.x.x.x>
set network submask=<x.x.x.x>
set network gateway=<x.x.x.x>
set network static=on/off
set network dhcp=on/off
set network autoip=on/off
quit
5 To change a parameter follow the style:
6 When you have finished typing the configuration parameters, type
7 Restart the module for the new TCP/IP settings to be implemented.
42
Telnet commands
Parameter value, for example:
set network static=on
set network ip=156.141.59.43
Then press Enter.
Parameter refers to the configuration parameter you are defining, and
value refers to the definitions you are assigning to the parameter. Each
entry is followed by a carriage return.
quit and press Enter to exit.
Description
displays syntax and descriptions of commands
displays the current settings and list of
commands
sets new ip address
sets new subnetmask
sets new default gateway
sets the ip to not change
sets the device to or to not get its id from a dhcp
server
sets the device to or to not try to automatically
get an ip
closes telnet and disconnects you
Agilent 1290 Infinity II ELSD User Manual