Agilent Technologies 1290 Infinity II User Manual page 39

5 Enter the module's IP Address, Subnet Mask and Default Gateway address
6 Select Apply again to confirm the changes.
7 Select Logout to close the session.
8 Restart the module for the new TCP/IP settings to be implemented.
Contact your system administrator for assistance on configuring the detector's network
N O T E
settings.
Changes to the TCP/IP parameters, other than those described, could render the ELSD
N O T E
inoperable.
Agilent 1290 Infinity II ELSD User Manual
and click Apply.
LAN Configuration
TCP/IP Parameter Configuration
4
39