Microplex SOLID 166E Operator's Manual page 77

_______________________________________________________________________________________________
Explanations:
________________________________________________________________________________________________
MICROPLEX
The SOLID 166E standard equipment contains the
following fonts:
Font no. Font width Font height
0600 10
0602 10
0610 12
1710 12
4508 P
4510 P
4714 P
5507 20
5508 16.6
5509 15
6610 10
9210 P
9310 P
2000 P
9900 P
Resumption of this standard font list see next page.
Font width:
Character distance in CPI (Characters Per Inch).
P = proportional, (meaning that each character has an individual width).
Font height:
Font height from the lowest descender to the upper edge of the highest
character, measured in graphical points (1/72 inch).
SC = scalable.
Operator's Manual SOLID 166E
Panel Functions
Font name
12 Kurilen
12 Kurilen Italic
10.1 Kurilen
10.1 Kurilen Italic
8.1 Helgoland
10 Helgoland
14.4 Helgoland Bold
7 Langeoog
7.9 Langeoog
9.1 Langeoog
10.1 Juist Monosp.
10.1 Tasmanien
10.1 Tasmanien Italic
SC Tasmanien
SC Neuwerk
77
Edition 1.1