Microplex SOLID 166E Operator's Manual page 4

4 Table of Contents
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Chapter
5. Panel Functions
5.1. Printing the Status Sheet
5.2. Page Length Adjustment
5.3. Paper Width Adjusting (Format Width)
5.4. Printing the Font List
5.5. Choosing Print Resolution
5.6. Hexdump - Mode Activation
5.7. Normal Print Mode Activation (incl. FORM FEED)
5.8. Clearing the Input Buffer (Cancel Job)
5.9. Printing the Menu Page
5.10. Generating Test Prints (Sliding Pattern)
5.11. Stacker Selection
5.12. Selecting the Number of Printpages per Page Format (Two-Up Mode) 66
5.13. Print Direction Selection
5.14. Data - Interface Configuration
5.15. Emulation Selection
5.16. Display Language Selection
5.17. Transparent Code Adjustment
5.18. Selection of Memory Distribution (Input Buffer)
5.19. Setting to Factory Default
5.20. Font Selection
5.21. Text Orientation Selection
5.22. Symbol Code Selection
5.23. Configuration of Text Margins
5.24. Image Shifting to the X-Direction
5.25. Image Shifting to the Y-Direction
5.26. Lines per Inch Setting (Line Spacing)
5.27. Number of Characters per Inch Setting (Character Spacing)
5.28. Print Density Setting
5.29. Configuration of Network Parameters (IP Address, e.g.)
________________________________________________________________________________________________
MICROPLEX Operator's Manual SOLID 166E
Page
53
53
55
56
57
58
60
61
62
63
64
65
68
69
70
72
73
74
75
76
79
80
81
82
84
86
87
88
89
Edition 1.1