Download Print this page

General Safety Instructions - Microplex SOLID 166E Operator's Manual

Advertisement

---------------------------------------------------------------------------------------------------------------------------------------------------------------------

1.4. General Safety Instructions

________________________________________________________________________________________________
MICROPLEX
This device produces, employs and possibly radiates high
frequency energy. Because of this, incorrect installation can
disturb radio communications.
All handling or procedures that differ from the ones being
described in this manual are to be omitted.
This MICROPLEX product and its consumables are designed and
tested according to strict safety standards.
By heeding the following instructions, the user is ensured safe
operations:
- Please make sure your electricity source is properly
grounded.
- Install the device on solid and level ground.
- Only trained staff are authorized to transport the equipment.
- Only use consumables which are specially developed for this
device.
- Using improper consumables may cause a reduction of
output quality or damage to the device.
- Ensure no liquids get on or into the device.
- Do not remove any cover or safety device fastened by screws.
Operator's Manual SOLID 166E
Introduction
11
Edition 1.1

Advertisement

loading
Need help?

Need help?

Do you have a question about the SOLID 166E and is the answer not in the manual?