114
Troubleshooting
_______________________________________________________________________________________________
7.1. Error during the Print Process
Defect
Printer does not work
Frequent paper jams
Stacker errors
If the remedies above are not successful or there is an error message that is not
described on the following pages please switch off the device and contact a
MICROPLEX authorized service engineer.
________________________________________________________________________________________________
MICROPLEX
Remedy
- Check the power supply, switch on the device.
- Make sure all covers of the device (e.g. the
front cover) are completely closed.
- Pay attention to the panel messages (see
section 7.3).
- Check if the paper has been inserted correctly
(see chapter 3).
- Make sure all paper is removed from the
paper path after a paper jam.
- Pay attention to all information in section 7.4:
Clearing Paper Jam
- See section 3.2.8 Troubleshooting (Stacker)
Operator's Manual SOLID 166E
Edition 1.1
Need help?
Do you have a question about the SOLID 166E and is the answer not in the manual?