Table of Contents
Advertisement
13 FITTING THE INSULATION
MODELS IDRA N DS 2000 to 2600
Once the storage cylinder is correctly positioned inside the
room where it is to be installed, proceed to fit the insulation
and the accessories to complete the cylinder.
Proceed as follows:
- Unpack all the material from the second package
- Wrap the insulation (3) around the storage cylinder,
carefully lining up the fittings with the holes on the
inside of the insulation. Secure the insulation in place
with the zips (4) at the edges of the two sections
1
4
3
14
- Perforate the insulation at the fittings and fit the insu-
lation sleeves (5)
- Fit the flange cover (6)
- Finally, fit the insulation top panel (7) and cover it with
the thermoformed cover (8).
4
2
3
4
8
7
5
6
Advertisement
Table of Contents
