Installing The Magnesium Anodes - Beretta IDRA N DS Installation And Operation Manual

MODELS IDRA N DS 2000
To remove the storage cylinder from the pallet, first remove
the insulation then secure lifting cables to the lifting points
on the top of the cylinder, and lift with care.
MODELS IDRA N DS 2600
- Proceed as follows to remove the storage cylinder
from the pallet:
- cut the straps
- secure the lifting cables to the lifting points on the top
of the storage cylinder
- carefully lift the storage cylinder and position it as re-
quired
12 INSTALLING THE MAGNESIUM
ANODES
Proceed as follows to install the magnesium anodes:
- Remove the protective plugs
- Fit the two magnesium anodes in the fittings (1) and
(2)
- Screw in the magnesium anodes using a suitable
spanner.
2
NOTE: Tighten to a torque of 25 Nm.
1
2
13