Maintenance - Craftsman 107.28791 Operator's Manual

MAINTENANCE SCHEDULE
The following schedules should be followed for normal care of your rider and mower.
RIDER MAINTENANCE, All Models
Clean Debris from Rider and Engine Compartment *
Clean Debris from Engine Cooling Areas & Air Filter *
Check Tire Pressure
Lubricate Rider & Mower *
Clean Deck & Check/Replace Mower Blades
Clean Battery & Cables
Check Rider Safety System **
Check / Adjust PTO Clutch
ENGINE MAINTENANCE,
20HP Kohler
Check Engine Oil Level *
Replace Air Filter *
Change Oil & Filter *
Remove Shroud, Clean Cooling Fins *
Replace Fuel Filter †
Check & Re-Gap / Replace Spark Plug
Service Starter Drive, Check & Adjust Valve
Clearance †
ENGINE MAINTENANCE,
24HP Briggs & Stratton
Check Engine Oil Level *
Replace Air Filter *
Change Oil *
Change Oil & Filter *
Clean Cooling Fins *
Replace Spark Plugs
Replace Fuel Filter †
Clean Combustion Chamber
* More often in hot (over 85° F: 30° C) weather or dusty operating conditions.
** Check the function of the safety system after the unit has been stored for 30 days or longer.
† These services should be performed by Sears or other qualified service dealer.

MAINTENANCE

Before
Each Use
•
•
8 Hours 25 Hours or
or Daily 2 Months
•
•
8 Hours 25 Hours
or Daily or Every
Season
•
17
Spring 8 25
& Fall Hours Hours
•
•
•
•
100 Hours 200 Hours
or Annually or 2 Years
•
•
•
50 Hours 100 Hours
or Every or Every
Season Season
•
•
100 200 Yearly
Hours Hours
•
• •
•
200 500
Hours Hours
• •
•
100-400
Hours
•
•
•
•
•