Revision History - Omron E5AJ-A2HB Operation Manual

A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version for manuals designated as E1 revisions.
Revision code Date
Z103-E1-1 November 1993
Z103-E1-1A January 1994
Z103-E1-2 March 1994
Z103-E1-3 June 1995
Z103-E1-4 November 1996

Revision History

E5jJ Temperature Controller
Operation Manual
Cat. No. WZ103-E3-1
Revised content
Original production
Page 20: Hysteresis row in the table corrected. Note added.
Page 21: Proportional band row in the table corrected. Note added.
Page 23: Proportional band setting in the diagram corrected.
Page 29: Stable range in both diagrams corrected. Note added.
Pages 30, 32: Stable range in top diagram corrected.
Page 51: "Heater current value level 1" corrected to "Heater burnout value" in
the equation.
Page 56: Stable range, alarm hysteresis 1, alarm hysteresis 2, and set point
lower limit value rows in the table corrected.
Page 57: Note added.
Major revision. Most of the pages have been changed or revised.
Section 10 Auto-tuning added.
Page 2: Output Units corrected.
Page 4: Note 1 corrected.
Page 6: Models added to the Output Units table.
Page 10: Models added to the Output Units table and second sentence after
the table corrected.
Page 28: First note on the page corrected.
Page 38: The polarities for RS-485 in E5AJ/E5EJ with Communications Func-
tion .
Page 2: Auto-tuning added to 1-1 Features .
Page 5: Auto-tuning added to Control mode in the table.
Page 7: EMC and Approved standards added to the top table and Enclosure
ratings changed. Notes added also.
Page 38: "+" added to terminals 20 and 19 and "–" added to terminal 17 in the
E5AJ/E5EJ Standard Model terminal arrangement.
Page 39: "+" added to terminal 17 and "–" added to terminal 16 in the E5BJ
terminal arrangement. "+" added to terminal 14 and "–" added to terminal 13 in
the E5CJ Standard Model terminal arrangement.
Pages 65 to 68: Terminal Covers and their dimensions added.
Revision
code
71