List Of Parameters - Omron E5AJ-A2HB Operation Manual

List of Parameters

3-3

List of Parameters

Display Level 0
Display
---
AL-1
AL-2
Display Level 1
Display
0
CP
HYS
SP-0
SP-1
SP-2
SP-3
in-S
20
Name
Process value Set point lower limit
display and set to set point upper
point setting limit ( C/ F)
Alarm set value 1 –1999 to 9999 C/ F
The decimal position
varies with the kind
of input.
Alarm set value 2 –1999 to 9999 C/ F
The decimal position
varies with the kind
of input.
To go to the next level, press the Level Key for 1 s min.
Note The values shown in Fahrenheit are applicable only for E5jJ-jjjj-F Mod-
els.
Name
Output value 0.0 to 100.0 %
display
Control period 1 to 99 s
Hysteresis 0.1 to 999.9 C/ F
Set point 0 Set point lower limit
to set point upper
limit ( C/ F)
Set point 1 Set point lower limit
to set point upper
limit ( C/ F)
Set point 2 Set point lower limit
to set point upper
limit ( C/ F)
Set point 3 Set point lower limit
to set point upper
limit ( C/ F)
Input shift value –199.9 to 999.9 C/ F 0.0
Setting range Setting
before
shipping
0
0
0
Setting/Display Setting
Range before
shipping
20
1.0 (1.8)
0
0
0
0
Section 3-3
Remarks
The present set point is
displayed and can be
changed if the E5jJ
incorporates an event input
function
Not displayed if alarm mode
switch 1 is set to 0.
Not displayed if alarm mode
switch 2 is set to 0.
Remarks
Displayed and can be set if
the E5jJ in PID control
operation has relay control
output or voltage control
output.
Displayed and can be set
when the E5jJ is in ON/OFF
control operation.
For models incorporating an
event input function.
For models incorporating an
event input function.
For models incorporating an
event input 2 function.
Displayed and can be set if
the default value is changed
on the engineering level.
For models incorporating an
event input 2 function.
Displayed and can be set if
the default value is changed
on the engineering level.
Displayed and can be set if
the default value is changed
on the engineering level.