Revision History - Omron E5ZD Operation Manual

A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.
Revision code
1 February 1990
2 May 1992
3 September 1992
3A June 1994
4 November 1996

Revision History

Cat. No. Z042-E1-4
Date
Original production
Previous version was completed rewritten and major additions of new information
and feature descriptions were made.
Information was added for new Fuzzy-logic Controllers as follows:
Page 3: Fuzzy-logic Controllers listed.
Pages 5 and 6: Precautions added.
Page 61: Fuzzy parameters added to diagram.
Page 62: Caution revised.
Page 65: Description of fuzzy-logic control added.
Page 68: Commands for fuzzy-logic control added to table.
Page 87: Precautions and other information added for autotuning.
Page 100: Fuzzy parameters added to table.
Page 108: New sections added on commands for fuzzy-logic control.
Page 112: Commands for fuzzy-logic control added to table.
Page 115: Commands for fuzzy-logic control added to table.
Page 117 to 119: Information added to entire section.
Pages 127 and 128: Fuzzy-logic specifications added.
Page 132: Commands for fuzzy-logic control added to table.
Information for switches SW5 and SW503 has been corrected to say "All pins are
set to OFF at the factory" throughout the manual.
"-E" was added to the end of all E5ZD Multipoint Temperature Controller model
numbers. A list of these can be found on pages 3 and 4 of the manual.
Pages 37, 39, 41, 43, 45, 48, and 132: Information on ES1000-TR011 was
removed and the second paragraph in section 2-3-5 was changed.
Pages 38, 39, 40, 41, 43, and 49 to 52: Information on ES1000-TR031 was
removed.
Pages 19, 20, and 22: Plug model numbers corrected.
Revision code
Revised content
143