Screen Brightness; Touch Screen; Handstrap - HandHeld Algiz 8 Manual

ALGIZ 8 Manual - Using the Algiz 8

Screen brightness

The screen brightness has 16 brightness levels and can be adjusted for indoor or outdoor use.
To increase or decrease the screen brightness first activate the Fn button, then press
the Arrow up or Arrow down buttons on the front.
When the brightness is at the lowest level the backlight will be completely turned off.
Note!
Battery life is dependent of screen brightness. To prolong battery life, lower
the screen brightness as much as possible.

Touch screen

The Algiz 8 is equipped with a resistive 4-wire Touch Screen for easy integration,
which allows the user to work with gloves.
WARNING!
Do not use sharp objects when operating the touch screen.
Selecting
To select an object on the screen, tap the object once.
Double click
To double click tap the object twice.
Right click
To right click an object, place the pointer over the object. Then press the Shift + Tab
button on the front.
Right click
To drag an object on the screen, press and hold down on the object while dragging it
to the new position. Release the object when it is in place.
Calibrate
When used for the first time or when users work in different angles, the touch screen
may require calibration.
To calibrate the touch screen do the following:
1. Open the Control Panel from the Windows Start menu.
2. Double-tap the Pointer Devices icon.
3. Select the Calibration tab and click the Calibrate button to start calibration.
4. Follow the instructions on the screen.
To test the new settings click the Test button.
Hand strap
The Algiz 8 comes with a multifunctional handstrap. The handstrap is adaptable
for right- and left-handed people and enables multiple working postures.
The handstrap may be adjusted with the four Velcro closings.
8