Using The Algiz 8; Turning On The Algiz 8; Shutting Down The Algiz 8; Reset - HandHeld Algiz 8 Manual

Using the Algiz 8

This chapter covers information about using the Algiz 8. The use of the Algiz 8 does not differ
from normal PC use.

Turning on the Algiz 8

To turn on the Algiz 8 press the power on button for one second, see chapter
"Function buttons" on page 5. The green power LED lights up.

Shutting down the Algiz 8

Before shutting down the system, save your work and close all running programs.
To shut down the system press the power button or choose Shut Down from the Start
menu.

Reset

If the Algiz 8 is not responding to commands, the system or application may
have crashed. To reset the system press the Ctrl-Alt-Delete button described in the
chapter "Function buttons" on page 5.

Power settings

To be revised
The Algiz 8 is equipped with an ACPI BIOS which enables the operating system
to conserve energy and prolong battery life. For the system to work properly make
sure the Power Option Properties have the correct settings according to the steps below.
To access the Power Option Properties:
1. Open the Control Panel from the Windows Start menu.
2. Select Performance and Maintenance.
3. Select Power Options.
Enable Hibernation (Suspend to disk mode):
1. Select the Hibernate tab.
2. Place a check mark in the checkbox to enable hibernation.
3. Click Apply to save the settings.
Note!
Hibernation requires sufficient disk space.
Power buttons:
1. Select the Advanced tab.
2. Under When I press the power button on my computer:
select Ask me what to do from the drop down list.
3. Under When I press the sleep button on my computer:
select Hibernate (Suspend to Disk mode). If there is not enough
disk space for Hibernation select Shut down.
Note!
This action will occur when the battery
is running critically low.
4. Click Apply to save the settings.
ALGIZ 8 Manual - Using the Algiz 8
7