External Device Connections; Docking Connector; Power Connector; Ethernet - HandHeld Algiz 8 Manual

External device connections

Docking connector

The Docking Connector located at center bottom, is used to connect the different
docks available. The Docking Connector is also used to connect the AC power source,
only connect Handheld approved AC Adaptor. The connector offers connection support for
power and a second USB device.
Caution!
The Power connector and the Docking connector must not be used at
the same time.

Power connector

The Power connector (1) is located under the lid on the left side of the Algiz 8. It is used
to connect an external power source to the Algiz 8.
Caution!
The Power connector and the Docking connector must not be used at
the same time.

Ethernet

The Ethernet connector (2) is located under the lid on the left side of the Algiz 8. It is
used to connect the Algiz 8 to a network.

USB 2.0

The USB connector (3) is located under the lid on the left side of the Algiz 8. It is used
to connect different external devices.

Suspend modes

The operating system makes it possible to suspend system operation of the Algiz 8 without closing
programs. The suspend modes is used to conserve battery power.
The Algiz 8 can be configured to suspend operation automatically when inactive.
ALGIZ 8 Manual - Using the Algiz 8
11