Transfer Bit Direction; Transmit Mode - Philips CEM2100/00 Service Manual

15. Synchronous Serial Interface (SIO2)
15.3 Function

15.3.2 Transfer bit direction

Transfer data direction can be selected by using SIO2CR<SIODIR>. The transfer data direction can't be set
individually for transmit and receive operations.
When the data direction is changed, the writing instruction to SIO2CR<SIODIR> should be executed while
the transfer is stopped (when SIO2CR<SIOF>= "0")
SIO2CR<SIOS>
pin
SCK2
SIO2TDB
SO2 pin
SIO2CR<SIOS>
pin
SCK2
SIO2TDB
SO2 pin

15.3.2.1 Transmit mode

15.3.2.2 Receive mode
A
Shift out
A7
A
Shift out
A0
Figure 15-5 Transfer Bit Direction (Example of transmit mode)
(1) MSB transmit mode
MSB transmit mode is selected by setting SIO2CR<SIODIR> to "0", in which case the data is
transferred sequentially beginning with the most significant bit (Bit7).
(2) LSB transmit mode
LSB transmit mode is selected by setting SIO2CR<SIODIR> to "1", in which case the data is
transferred sequentially beginning with the least significant bit (Bit0).
(1) MSB receive mode
MSB receive mode is selected by setting SIO2CR<SIODIR> to "0", in which case the data is
received sequentially beginning with the most significant bit (Bit7).
A6 A5 A4
(a) MSB transfer
A1 A2 A3
(b) LSB transfer
Page 182
T5CL8
A3 A2 A1
A4 A5 A6
A0
A7