4 Listen to radio
Tune to a radio station
Press SOURCE repeatedly to select Tuner.
Press or to select band: [FM1], [FM2],
[FM3], [AM1], or [AM2] .
to tune to a radio station
The radio station is broadcast.
To search for a radio station
Select tuner sensitivity
You can adjust the tuner sensitivity if you want
to receive more radio stations or only stations
with strong signal.
Press MENU/DISP for over 2 seconds.
Press or repeatedly until [LOCAL] or
[DX] is displayed.
Rotate to select a setting:
[LOCAL] (local): Only stations with
strong signal can be broadcast.
[DX] (distance): Stations with strong
and weak signals can be broadcast.
to confirm the selection.
Select stereo/mono broadcasting
For stations with weak signals: to improve the
reception, change to monoaural sound.
Press MENU/DISP for seconds.
Press or repeatedly until [STEREO]
or [MONO] is displayed.
Turn to select a setting:
[STEREO]: stereo broadcast.
[MONO]: mono broadcast.
to confirm the selection.
Store radio stations in
You can store up to 6 stations in each band.
Store staions automatically
Press SEARCH for seconds.
The six strongest stations of the
selected band are saved in preset
channels 1-6 automatically.
Store staions manually
Tune to a station that you want to store.
(see 'Tune to a radio station' on page 16)
Press one of the numbered buttons 1 to 6
The station is saved in the selected
Tune to a preset station
Press or to select band.
Press the number button 1 to 6 to select
the preset station.
5 Use bluetooth
With this car audio system, you can listen
to audio files from a player or make a call
if bluetooth connection is available on your
phone or player.
Pairing bluetooth devices
You can pair your bluetooth device with the
unit as follows:
Turn on bluetooth function on the device.
Setup bluetooth fuction on your device.
Select "CEM250" in the pairing list.
Enter default password "0000".
"[PAIR OK]" is displayed on the panel
if pairing succeeds.
Otherwise, "[PAIR ERR]" is displayed.
"[CONNECT]" is displayed when
connection is established.
Play audio files
You can listen to audio from a bluetooth device
and control playback with the unit.
Press SOURCE repeatedly to select [BT
To play, press 1,
To pause, press 1,
You can dial a number by voice if your mobile
phone supports voice dialing.
Press for seconds.
[VOIC DIAL] is displayed.
Speak a name stored in contact list stored
in the phone.
The unit repeats the number and calls
[NO MATCH] is displayed if the unit
does not recognize a number.
Make a call
Press 0-9 to enter phone number.
to change a number.
to reset entered numbers.
Press to dial.
If there is another incoming call during call,
[CALL WAITING] flashes on the display panel.
Press to terminate the present call.
The other call is automatically
The first call is terminated.
You can transfer voice from loudspeaker to
mobile phones during call.
[TRANSFER] is displayed.
to terminate call.