Beckhoff CB8283 Operating Manual
  1. Manuals
  2. Brands
  3. Beckhoff Manuals
  4. Motherboard
  5. CB8283
  6. Operating manual
Beckhoff CB8283 Operating Manual

Beckhoff CB8283 Operating Manual

Computerboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Operating Manual | EN
CB8283
Computerboard
27.02.2025 | Version: 1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CB8283 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Beckhoff CB8283

Summary of Contents for Beckhoff CB8283

  • Page 1 Operating Manual | EN CB8283 Computerboard 27.02.2025 | Version: 1.0...

  • Page 3: Table Of Contents

    Internal interfaces.......................... 21 7.5.1 M.2 2242/2280k Key B (P1000) .................. 21 7.5.2 Battery (BT500)........................  23 8 BIOS ................................. 24 Using the setup .......................... 24 Main CB8283 .......................... 25 Advanced ............................ 26 8.3.1 RC ACPI settings ...................... 27 8.3.2 CPU Configuration ...................... 28 8.3.3 Trusted Computing......................
  • Page 4 11.2 Environmental conditions ........................  89 11.3 Thermal specifications ........................ 90 12 Appendix I: Post Codes ..........................  91 13 Appendix II: Resources ..........................  92 13.1 Interrupt ............................ 92 13.2 PCI-Devices ............................  92 13.3 SMB-Devices .......................... 93 14 Support and Service .......................... 94 Version: 1.0 CB8283...

  • Page 5: Documentation Issue Status

    Documentation issue status Documentation issue status  Version  Modifications  0.1  First preliminary version G1  1.0  First release, version G1 CB8283 Version: 1.0...

  • Page 6: Notes On The Documentation

    EP1590927, EP1789857, EP1456722, EP2137893, DE102015105702 and similar applications and registrations in several other countries. ® EtherCAT is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany Copyright © Beckhoff Automation GmbH & Co. KG, Germany. The distribution and reproduction of this document as well as the use and communication of its contents without express authorization are prohibited.

  • Page 7: Safety Instructions

    All of the components are supplied in specific hardware and software configurations depending on the application requirements. Modifications to hardware or software configurations other than those described in the documentation are not permitted, and nullify the liability of Beckhoff Automation GmbH & Co. KG. Personnel qualification This description is only intended for trained specialists in control, automation, and drive technology who are familiar with the applicable national standards.
  • Page 8 Safety instructions Intended use The CB8283 Computer Board was designed and developed exclusively for configuration in automation processes. To that end the board is equipped with external interfaces in order to acquire or output digital or analog signals or forward them to higher-level components.

  • Page 9: Notes On Information Security

    Notes on information security Notes on information security The products of Beckhoff Automation GmbH & Co. KG (Beckhoff), insofar as they can be accessed online, are equipped with security functions that support the secure operation of plants, systems, machines and networks.

  • Page 10: Overview

    The integrated EtherCAT P connection enables you to connect actuators/sensors directly via IP67-protected EtherCAT P Box modules. The compact format of the CB8283 offers the full functionality of a motherboard for space-saving and freely mountable industrial PC hardware and advanced Industry 4.0 concepts.

  • Page 11: List Of Features

    Availability of the processors The list of features lists all the processors that can be ordered. Their actual availability depends on the manufacturer.  List of features  CB8283  CPU  Intel® Atom™ x6212RE (DC/1.5M/1.2GHz/TDP6W)  Intel® Atom™ X6414RE (QC/1.5M/1.5GHZ/TDP9W)  Intel® Atom™ X6425RE (QC/1.5M/1.9GHz/TDP12W)  Socket...

  • Page 12: Specifications And Documents

    • i226 Datasheet • www.intel.com • SMSC® chip description • SCH3114 Datasheet (NDA required) • www.smsc.com • American Megatrends® • Aptio™ Text Setup Environment (TSE) User Manual • www.ami.com • American Megatrends® • Aptio™ 5.x Status Codes • www.ami.com Version: 1.0 CB8283...

  • Page 13: Detailed Description

    Cards of different types have different recesses (keys). Depending on which types are supported, ports can accept expansion cards of one or more types. The M.2 socket of the CB8283 supports M.2 modules with Key B. SATA signals that allow an SSD to be connected are output via the interface.

  • Page 14: Interfaces

    USB 2.0 connection. Limitations in the maximum cable length are also no rarity. All of these interface-specific requirements can be found in the respective specifications and must be observed accordingly. NOTICE IP65/67 cable type The cables used must comply with IP65/67! Version: 1.0 CB8283...

  • Page 15: Interface Overview

    Interfaces Interface overview The interfaces of the CB8283 board are summarized in the figure below. The table below shows the function of the respective interface, as well as the manual page where you can find further information on this connection.

  • Page 16: External Interfaces

     Data + (USB 2.0)  4  GND  Ground  5  SSRX-  Receive line - (USB 3.2)  6  SSRX+  Receive line + (USB 3.2)  7  GND  Ground  8  SSTX-  Transmit line - (USB 3.2)  9  SSTX+  Transmit line + (USB 3.2) Version: 1.0 CB8283...

  • Page 17: Ethercat P Ip65/67 (P1106)

     Signal  Description  1  LAN41+  LAN signal + and ground  2  LAN40 +  LAN signal + and ground  3  LAN40 -  LAN signal - and supply voltage 24 V  4  LAN41 -  LAN signal - and supply voltage 24 V CB8283 Version: 1.0...

  • Page 18: Power Connection Ip65/67 (P1107)

    Please note that there are system states in which the activation of a connected PC_Start switch is ignored by the system, e.g. during booting of a Windows operating system. In this case, repeat the operation of the switch after a few seconds. The same applies to connected PC_Start push buttons. Version: 1.0 CB8283...

  • Page 19: Lan Ip65/67 (P1100, P1102, P1104)

     LAN line 0 -  3  LAN-1  LAN line 1 +  4  LAN-2  LAN line 2 +  5  LAN-2#  LAN line 2 -  6  LAN-1  LAN line 1 -  7  LAN-3  LAN line 3 +  8  LAN-3#  LAN line 3 - CB8283 Version: 1.0...

  • Page 20: Mini Displayport Ip65/67 (P1005)

     GND  3.3 V  Supply voltage 3.3 V Switching to HDMI DisplayPort signals are led out via the interface by default. With the use of a level shifter cable the board switches the DisplayPort specification 1.1 automatically to HDMI signals. Version: 1.0 CB8283...

  • Page 21: Internal Interfaces

    M.2 2242/2280k Key B (P1000) The CB8283 is equipped with an M.2 socket, into which an M.2-2242/2280 card (Key B) can be inserted. SATA signals (up to 3 Gb/s), which enable the connection of an M.2-SSD card, are fed out via this socket.
  • Page 22  (not led out)  Ground  GND9 58  NC2  (not led out)  (not led out)  ANTCTL0 60  COEX3  (not led out)  (not led out)  ANTCTL1 62  COEX2  (not led out)  (not led out)  ANTCTL2 64  COEX1  (not led out) Version: 1.0 CB8283...

  • Page 23: Battery (Bt500)

    The board is delivered with a CR2032 battery holder together with a 3 V battery. Fig. 9: BT500 battery UL conformity All technical measures for UL conformity are already integrated on the board. Accordingly, no additional actions are necessary for the connection of an RTC battery. The battery must be connected directly. CB8283 Version: 1.0...

  • Page 24: Bios

    Use the Enter key to select menu items and call submenus or selection dialogs. For each setup option a help text is displayed at the top right, which in many cases contains useful information about the option and permitted values, etc. Version: 1.0 CB8283...

  • Page 25: Main Cb8283

    BIOS Main CB8283                Aptio Setup - AMI     Main  Advanced  Chipset  Security  Boot  Save & Exit ┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐ │  Board Information                                             ▲│                                │ │  Board                                CB8283                   █│                                │ │  Revision                             0                        █│                                │ │  Bios Version                         0.07                     █│                                │ │  BIOSAPI Version                      2.44.0002                █│                                │ │                                                                █│                                │ │  Compute Die Information                                       █│                                │ │  Name                                 ElkhartLake              █│                                │ │  Type                                 Intel Atom(R) x6225RE    █│                                │ │                                       Processor @ 1.90 GHz     █│                                │ │  Speed                                1900 MHz                 █│                                │ │  ID                                   0x90661                  █│                                │ │  Stepping                             B0                       █├────────────────────────────────┤ │  Number of Processors                 4Cores(s) / 4Thread(s)   █│→←: Select Screen               │ │  Microcode Revision                   17                       █│↑↓: Select Item                 │ │  GT Info                              GT4 (0x4571)             █│Enter: Select                   │ │                                                                █│+/─: Change Opt.                │ │  IGFX GOP Version                     18.0.1044                █│F1: General Help                │ │  Memory RC Version                    0.0.4.111                █│F2: Previous Values             │ │  Total Memory                          8192 MB                 █│F3: Optimized Defaults          │ │  Memory Data Rate                      3200 MTPS               ▒│F4: Save & Reset                │ │                                                                ▒│ESC: Exit                       │ │  PCH Information                                               ▒│                                │ │  Name                                 EHL PCH                  ▒│                                │ │  Stepping                             B1                       ▒│                                │ │                                                                ▒│                                │ │  ME FW Version                        15.40.30.2979            ▒│                                │ │                                                                ▒│                                │ │  System Date                          [Sun 01/21/2024]         ▒│                                │ │  System Time                          [09:57:31]               ▼│                                │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry  Options...

  • Page 26: Advanced

     Submenu: Intel Ethernet Controller I226-IT [} 40]  I226-IT - 00:A0:C9:00:00:00 ®  ► Intel Ethernet Controller  Submenu: Intel Ethernet Controller I226-IT [} 41]  I226-IT - 00:A0:C9:00:00:00  ► User Password Management  Submenu: User Password Management [} 42]  ► Driver Health  Submenu: Driver Health [} 42] Version: 1.0 CB8283...

  • Page 27: Rc Acpi Settings

     PECI Access Method  Direct I/O / ACPI  Native PCIE Enable  Enabled / Disabled  Native ASPM  Auto / Enabled / Disabled  BDAT ACPI Table Support  Disabled / Enabled  ACPI Debug  Disabled / Enabled  MSI enabled  Enabled / Disabled CB8283 Version: 1.0...

  • Page 28: Cpu Configuration

     AP threads Idle Manner  MWait Loop / Halt Loop / Run Loop  AES  Enabled / Disabled  MachineCheck  Enabled / Disabled  Monitor MWait  Enabled / Disabled  ►CPU SMM Enhancement  Submenu: CPU SMM Enhancement [} 29]  #AC Split Lock  Disabled / Enabled Version: 1.0 CB8283...

  • Page 29: Cpu Smm Enhancement

    │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ │                                                                 │                                │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2023 AMI  BIOS entry  Options  CPU SMM Enhancement Information  SMM Use Delay Indication  Enabled / Disabled  SMM Use Block Indication  Enabled / Disabled  SMM Use SMM en - US Indication  Enabled / Disabled CB8283 Version: 1.0...

  • Page 30: Trusted Computing

     None / TPM Clear  Platform Hierarchy  Enabled / Disabled  Storage Hierarchy  Enabled / Disabled  Endorsement Hierarchy  Enabled / Disabled  Physical Presence Spec Version  1.3 / 1.2  TPM 2.0 InterfaceType  None  Device Select  Auto / TPM 1.2 / TPM 2.0 Version: 1.0 CB8283...

  • Page 31: Acpi Settings

     Lock Legacy Resources  Disabled / Enabled 8.3.5 Hardware Monitor                Aptio Setup - AMI           Advanced ┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐ │  Pc Health Status                                               │                                │ │                                                                 │                                │ │  CPU dig.                             : +44 'C                  │                                │ │  MB Temp                              : +33 'C                  │                                │ │  5V                                   : +5.10 V                 │                                │ │                                                                 ├────────────────────────────────┤ │                                                                 │→←: Select Screen               │ │                                                                 │↑↓: Select Item                 │ │                                                                 │Enter: Select                   │ │                                                                 │+/─: Change Opt.                │ │                                                                 │F1: General Help                │ │                                                                 │F2: Previous Values             │ │                                                                 │F3: Optimized Defaults          │ │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry  Options  PC Health Status  None CB8283 Version: 1.0...

  • Page 32: Acoustic Management Configuration

    BIOS 8.3.6 Acoustic Management Configuration                Aptio Setup - AMI           Advanced ┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐ │  Acoustic Management Configuration                              │                                │ │                                                                 │                                │ │  HDD not found                                                  ├────────────────────────────────┤ │                                                                 │→←: Select Screen               │ │                                                                 │↑↓: Select Item                 │ │                                                                 │Enter: Select                   │ │                                                                 │+/─: Change Opt.                │ │                                                                 │F1: General Help                │ │                                                                 │F2: Previous Values             │ │                                                                 │F3: Optimized Defaults          │ │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry  Options  Acoustic Management Configuration  HDD not found  None Version: 1.0 CB8283...

  • Page 33: Pci Subsystem Settings

    │                                                                 │                                │ │  WARNING: Changing PCI Device(s) settings may                   │                                │ │  have unwanted side effects! System may HANG!                   │                                │ │  PROCEED WITH CAUTION.                                          ├────────────────────────────────┤ │                                                                 │→←: Select Screen               │ │                                                                 │↑↓: Select Item                 │ │                                                                 │Enter: Select                   │ │                                                                 │+/─: Change Opt.                │ │                                                                 │F1: General Help                │ │                                                                 │F2: Previous Values             │ │                                                                 │F3: Optimized Defaults          │ │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry Options  AMI PCI Driver Version:  None  PCI Settings Common for all Devices:  BME DMA Mitigation  Disabled / Enabled CB8283 Version: 1.0...

  • Page 34: Usb Configuration

     USB Mass Storage Driver Support  Enabled / Disabled  USB hardware delays and time-outs:  USB transfer time-out  1 / 5 / 10 / 20 sec  Device reset time-out  10 / 20 / 30 / 40 sec  Device power-up delay  Auto / Manual Version: 1.0 CB8283...

  • Page 35: Network Stack Configuration Disabled

     Network Stack  Enabled / Disabled  Ipv4 PXE Support  Enabled / Disabled  Ipv4 HTTP Support  Enabled / Disabled  Ipv6 PXE Support  Enabled / Disabled  Ipv6 HTTP Support  Enabled / Disabled  PXE boot wait time  None  Media detect count  None CB8283 Version: 1.0...

  • Page 36: Power Controller Options

     None  Voltage (Min/Max)  None  Temperature (Min/Max)  None  Enable Us in onboard EtherCAT-P  Disabled / Enabled  Enable Up in onboard EtherCAT-P  Disabled / Enabled  WatchDogTimer Mode  Normal Mode / Compatibility Mode  WDT OSBoot Timeout  Disabled / 45/60/75…225/240/255 Seconds Version: 1.0 CB8283...

  • Page 37: Nvme Configuration

    │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry  Options  Disk Memory Type:  Boot Service Data / Reserved  ► Create raw  Submenu: Create raw [} 38]  ► Create from file  None  Created RAM disk list:  Remove selected RAM disk(s).  None CB8283 Version: 1.0...
  • Page 38 8.3.13.1 Create raw                 Aptio Setup - AMI           Advanced ┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐ │                                                                 │The valid RAM disk size should  │ │  Size (Hex):                      1                             │be multiples of the RAM disk    │ │                                                                 │block size.                     │ │  Create & Exit                                                  │                                │ │  Discard & Exit                                                 ├────────────────────────────────┤ │                                                                 │→←: Select Screen               │ │                                                                 │↓↑: Select Item                 │ │                                                                 │Enter: Select                   │ │                                                                 │+/─: Change Opt.                │ │                                                                 │F1: General Help                │ │                                                                 │F2: Previous Values             │ │                                                                 │F3: Optimized Defaults          │ │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry  Options  Size (Hex):  None  Create & Exit  None  Discard & Exit  None Version: 1.0 CB8283...
  • Page 39 ┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐ │                                                                 │                                │ │                                                                 │                                │ │  UEFI Driver                          Intel (R) Pro/1000 Open   │                                │ │                                       Source 4.9.99 PCI─E       │                                │ │  Device Name                          Intel (R) Ethernet        ├────────────────────────────────┤ │                                       Controller I226─IT        │→←: Select Screen               │ │  PCI Device ID                        125D                      │↑↓: Select Item                 │ │                                                                 │Enter: Select                   │ │  Link Status                          [Disconnected]            │+/─: Change Opt.                │ │                                                                 │F1: General Help                │ │  MAC Address                          00:A0:C9:00:00:00         │F2: Previous Values             │ │                                                                 │F3: Optimized Defaults          │ │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry  Options  UEFI Driver  None  Device Name  None  PCI Device ID  None  Link Status  None  MAC Address  None CB8283 Version: 1.0...
  • Page 40 ┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐ │                                                                 │                                │ │                                                                 │                                │ │  UEFI Driver                          Intel (R) Pro/1000 Open   │                                │ │                                       Source 4.9.99 PCI─E       │                                │ │  Device Name                          Intel (R) Ethernet        ├────────────────────────────────┤ │                                       Controller I226─IT        │→←: Select Screen               │ │  PCI Device ID                        125D                      │↑↓: Select Item                 │ │                                                                 │Enter: Select                   │ │  Link Status                          [Disconnected]            │+/─: Change Opt.                │ │                                                                 │F1: General Help                │ │  MAC Address                          00:A0:0C9:00:00:00        │F2: Previous Values             │ │                                                                 │F3: Optimized Defaults          │ │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry  Options  UEFI Driver  None  Device Name  None  PCI Device ID  None  Link Status  None  MAC Address  None Version: 1.0 CB8283...
  • Page 41 ┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐ │                                                                 │                                │ │                                                                 │                                │ │  UEFI Driver                          Intel (R) Pro/1000 Open   │                                │ │                                       Source 4.9.99 PCI─E       │                                │ │  Device Name                          Intel (R) Ethernet        ├────────────────────────────────┤ │                                       Controller I226─IT        │→←: Select Screen               │ │  PCI Device ID                        125D                      │↑↓: Select Item                 │ │                                                                 │Enter: Select                   │ │  Link Status                          [Disconnected]            │+/─: Change Opt.                │ │                                                                 │F1: General Help                │ │  MAC Address                          00:A0:C9:00:00:00         │F2: Previous Values             │ │                                                                 │F3: Optimized Defaults          │ │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry  Options  UEFI Driver  None  Device Name  None  PCI Device ID  None  Link Status  None  MAC Address  None CB8283 Version: 1.0...

  • Page 42: User Password Management

              Advanced ┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐ │► Intel(R) PRO/1000 Open Source 8.3.10 PCI─E     Healthy         │Provides Health Status for the  │ │► Intel(R) PRO/1000 Open Source 4.9.99 PCI─E     Healthy         │Drivers/Controllers             │ │                                                                 │                                │ │                                                                 ├────────────────────────────────┤ │                                                                 │→←: Select Screen               │ │                                                                 │↑↓: Select Item                 │ │                                                                 │Enter: Select                   │ │                                                                 │+/─: Change Opt.                │ │                                                                 │F1: General Help                │ │                                                                 │F2: Previous Values             │ │                                                                 │F3: Optimized Defaults          │ │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry  Options  ► Intel(R) PRO/1000 Open  None  Source 8.3.10 PCI-E  ► Intel(R) PRO/1000 Open  None  Source 4.9.99 PCI-E Version: 1.0 CB8283...

  • Page 43: System Agent (Sa) Configuration

     Enabled / Disabled  X2APIC Opt Out  Disabled / Enabled  DMA Control Guarantee  Disabled / Enabled  IGD VTD Enable  Enabled / Disabled  IOP VTD Enable  Enabled / Disabled  GNA Device (B0:D8:F0)  Enabled / Disabled  CRID Support  Disabled / Enabled  Above 4GB MMIO BIOS assignment  Enabled / Disabled CB8283 Version: 1.0...

  • Page 44: Graphics Configuration

     172.8 / 307.2 / 556.8 / 652.8 Mhz  Max CdClock freq based on Reference Clk  VBT Select  eDP / MIPI  ► LCD Control  Submenu: LCD Control [} 46] ®  ► Intel Ultrabook Event Support  Submenu: Intel Ultrabook Event Support [} 47] Version: 1.0 CB8283...

  • Page 45: External Gfx Card Primary Display Configuration

    │                                                                 │PCIE16/PCIE17/PCIE18/PCIE19 of  │ │                                                                 │D27:F0/F1/F2/F3, Graphics       │ │                                                                 │device should be Primary PCIE.  │ │                                                                 ├────────────────────────────────┤ │                                                                 │→←: Select Screen               │ │                                                                 │↓↑: Select Item                 │ │                                                                 │Enter: Select                   │ │                                                                 │+/─: Change Opt.                │ │                                                                 │F1: General Help                │ │                                                                 │F2: Previous Values             │ │                                                                 │F3: Optimized Defaults          │ │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2023 AMI  BIOS entry  Options  External Gfx Card Primary Display Configuration  Primary PCIE  Auto / PCI1 - PCIE19 CB8283 Version: 1.0...

  • Page 46: Lcd Control

     VBIOS Default / Various LVDS Resolutions  Panel Scaling  Auto / Off / Force Scaling  Backlight Control  PWM Normal / PWM Inverted  Active LFP  eDP Port / No eDP  Panel Color Depth  18 Bit / 24 Bit  Backlight Brightness  None Version: 1.0 CB8283...
  • Page 47 │  Intel (R) Ultrabook Event Support                              │Enable/Disable IUER Slate       │ │                                                                 │Functionality                   │ │  IUER Slate Enable                    [Disabled]                │                                │ │  IUER Dock Enable                     [Disabled]                │                                │ │                                                                 ├────────────────────────────────┤ │                                                                 │→←: Select Screen               │ │                                                                 │↑↓: Select Item                 │ │                                                                 │Enter: Select                   │ │                                                                 │+/─: Change Opt.                │ │                                                                 │F1: General Help                │ │                                                                 │F2: Previous Values             │ │                                                                 │F3: Optimized Defaults          │ │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry  Options ®  Intel Ultrabook Event Support  IUER Slate Enable  Disabled / Enabled  IUER Dock Enable  Disabled / Enabled CB8283 Version: 1.0...

  • Page 48: Pch-Io Configuration

     Submenu: USB Configuration [} 67]  ► HD Audio Configuration  Submenu: HD Audio Configuration [} 68]  State After G3  S0 State / S5 State  Compatible Revision ID  None  Legacy IO Low Latency  Disabled / Enabled  Enable TCO Timer  Enabled / Disabled Version: 1.0 CB8283...

  • Page 49: Pci Express Configuration

     Submenu: PCI Express Root Port 4 [} 53]  ► PCI Express Root Port 5  Submenu: PCI Express Root Port 5 [} 56]  PCI Express Root Port 6  None  ► PCI Express Root Port 7  Submenu: PCI Express Root Port 7 [} 60] CB8283 Version: 1.0...
  • Page 50 │  PCI Express Root Port 3              [Enabled]                ▲│Control the PCI Express Root    │ │                                                                █│Port.                           │ │  Connection Type                      [Slot]                   █│                                │ │  ASPM                                 [Disabled]               █│                                │ │  L1 Substates                         [Disabled]               █│                                │ │  ACS                                  [Enabled]                █│                                │ │  PTM                                  [Disabled]               █│                                │ │  DPC                                  [Enabled]                █│                                │ │  EDPC                                 [Enabled]                █│                                │ │    URR                                [Disabled]               █│                                │ │    FER                                [Disabled]               █├────────────────────────────────┤ │    NFER                               [Disabled]               █│→←: Select Screen               │ │    CER                                [Disabled]               █│↓↑: Select Item                 │ │    SEFE                               [Disabled]               █│Enter: Select                   │ │    SENFE                              [Disabled]               █│+/─: Change Opt.                │ │    SECE                               [Disabled]               ▒│F1: General Help                │ │    PME SCI                            [Enabled]                ▒│F2: Previous Values             │ │    Hot Plug                           [Disabled]               ▒│F3: Optimized Defaults          │ │    Advanced Error Reporting           [Enabled]                ▒│F4: Save & Reset                │ │  PCIe Speed                           [Auto]                   ▒│ESC: Exit                       │ │    Transmitter Half Swing             [Disabled]               ▒│                                │ │  Detect Timeout                       0                        ▒│                                │ │  Extra Bus Reserved                   0                        ▒│                                │ │  Reserved Memory                      10                       ▒│                                │ │  Reserved I/O                         4                        ▒│                                │ │                                                                ▒│                                │ │  PCH PCIe LTR Congguration                                     ▒│                                │ │  LTR                                  [Enabled]                ▒│                                │ │    Snoop Latency Override             [Auto]                   ▒│                                │ │    Non Snoop Latency Override         [Auto]                   ▒│                                │ │    Force LTR Override                 [Disabled]               ▒│                                │ │                                                                ▒│                                │ │  LTR Lock                             [Disabled]               ▒│                                │ │                                                                ▒│                                │ │► Extra Options                                                 ▼│                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI Version: 1.0 CB8283...
  • Page 51  Enabled / Disabled  Snoop Latency Override  Auto / Manual / Disabled  Non Snoop Latency Override  Auto / Manual / Disabled  Force LTR Override  Disabled / Enabled  LTR Lock  Disabled / Enabled  ► Extra Options  Submenu: Extra Options [} 52] CB8283 Version: 1.0...

  • Page 52: Extra Options

    │  Detect Non─Compliance Device         [Disabled]                │Detect Non─Compliance Device PCI│ │  Prefetchable Memory                  10                        │Express Device. If enable, it   │ │  Reserved Memory Alignment            1                         │will take more time at Post     │ │  Prefetchable Memory Alignment        1                         │time.                           │ │                                                                 ├────────────────────────────────┤ │                                                                 │→←: Select Screen               │ │                                                                 │↓↑: Select Item                 │ │                                                                 │Enter: Select                   │ │                                                                 │+/─: Change Opt.                │ │                                                                 │F1: General Help                │ │                                                                 │F2: Previous Values             │ │                                                                 │F3: Optimized Defaults          │ │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry  Options  Detect Non-Compliance Device  Disabled / Enabled  Prefetchable Memory  None  Reserved Memory Alignment  None  Prefetchable Memory Alignment  None Version: 1.0 CB8283...
  • Page 53 │  PCI Express Root Port 4              [Enabled]                ▲│Control the PCI Express Root    │ │                                                                █│Port.                           │ │  Connection Type                      [Slot]                   █│                                │ │  ASPM                                 [Disabled]               █│                                │ │  L1 Substates                         [Disabled]               █│                                │ │  ACS                                  [Enabled]                █│                                │ │  PTM                                  [Disabled]               █│                                │ │  DPC                                  [Enabled]                █│                                │ │  EDPC                                 [Enabled]                █│                                │ │    URR                                [Disabled]               █│                                │ │    FER                                [Disabled]               █├────────────────────────────────┤ │    NFER                               [Disabled]               █│→←: Select Screen               │ │    CER                                [Disabled]               █│↓↑: Select Item                 │ │    SEFE                               [Disabled]               █│Enter: Select                   │ │    SENFE                              [Disabled]               █│+/─: Change Opt.                │ │    SECE                               [Disabled]               ▒│F1: General Help                │ │    PME SCI                            [Enabled]                ▒│F2: Previous Values             │ │    Hot Plug                           [Disabled]               ▒│F3: Optimized Defaults          │ │    Advanced Error Reporting           [Enabled]                ▒│F4: Save & Reset                │ │  PCIe Speed                           [Auto]                   ▒│ESC: Exit                       │ │    Transmitter Half Swing             [Disabled]               ▒│                                │ │  Detect Timeout                       0                        ▒│                                │ │  Extra Bus Reserved                   0                        ▒│                                │ │  Reserved Memory                      10                       ▒│                                │ │  Reserved I/O                         4                        ▒│                                │ │                                                                ▒│                                │ │  PCH PCIe LTR Congguration                                     ▒│                                │ │  LTR                                  [Enabled]                ▒│                                │ │    Snoop Latency Override             [Auto]                   ▒│                                │ │    Non Snoop Latency Override         [Auto]                   ▒│                                │ │    Force LTR Override                 [Disabled]               ▒│                                │ │                                                                ▒│                                │ │  LTR Lock                             [Disabled]               ▒│                                │ │                                                                ▒│                                │ │► Extra Options                                                 ▼│                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI CB8283 Version: 1.0...
  • Page 54  Enabled / Disabled  Snoop Latency Override  Auto / Manual / Disabled  Non Snoop Latency Override  Auto / Manual / Disabled  Force LTR Override  Disabled / Enabled  LTR Lock  Disabled / Enabled  ► Extra Options  Submenu: Extra Options [} 55] Version: 1.0 CB8283...
  • Page 55 │  Detect Non─Compliance Device         [Disabled]                │Detect Non─Compliance Device PCI│ │  Prefetchable Memory                  10                        │Express Device. If enable, it   │ │  Reserved Memory Alignment            1                         │will take more time at Post     │ │  Prefetchable Memory Alignment        1                         │time.                           │ │                                                                 ├────────────────────────────────┤ │                                                                 │→←: Select Screen               │ │                                                                 │↓↑: Select Item                 │ │                                                                 │Enter: Select                   │ │                                                                 │+/─: Change Opt.                │ │                                                                 │F1: General Help                │ │                                                                 │F2: Previous Values             │ │                                                                 │F3: Optimized Defaults          │ │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry  Options  Detect Non-Compliance Device  Disabled / Enabled  Prefetchable Memory  None  Reserved Memory Alignment  None  Prefetchable Memory Alignment  None CB8283 Version: 1.0...
  • Page 56 │  Connection Type                      [Slot]                   █│                                │ │  ASPM                                 [Disabled]               █│                                │ │  L1 Substates                         [Disabled]               █│                                │ │  ACS                                  [Enabled]                █│                                │ │  Multi─VC                             [Enabled]                █│                                │ │► VC to TC Mapping                                              █│                                │ │  PTM                                  [Disabled]               █│                                │ │  DPC                                  [Enabled]                █│                                │ │  EDPC                                 [Enabled]                █│                                │ │    URR                                [Disabled]               █│                                │ │    FER                                [Disabled]               █├────────────────────────────────┤ │    NFER                               [Disabled]               █│→←: Select Screen               │ │    CER                                [Disabled]               █│↓↑: Select Item                 │ │    SEFE                               [Disabled]               █│Enter: Select                   │ │    SENFE                              [Disabled]               █│+/─: Change Opt.                │ │    SECE                               [Disabled]               ▒│F1: General Help                │ │    PME SCI                            [Enabled]                ▒│F2: Previous Values             │ │    Hot Plug                           [Disabled]               ▒│F3: Optimized Defaults          │ │    Advanced Error Reporting           [Enabled]                ▒│F4: Save & Reset                │ │  PCIe Speed                           [Auto]                   ▒│ESC: Exit                       │ │    Transmitter Half Swing             [Disabled]               ▒│                                │ │  Detect Timeout                       0                        ▒│                                │ │  Extra Bus Reserved                   0                        ▒│                                │ │  Reserved Memory                      10                       ▒│                                │ │  Reserved I/O                         4                        ▒│                                │ │                                                                ▒│                                │ │  PCH PCIe LTR Congguration                                     ▒│                                │ │  LTR                                  [Enabled]                ▒│                                │ │    Snoop Latency Override             [Auto]                   ▒│                                │ │    Non Snoop Latency Override         [Auto]                   ▒│                                │ │    Force LTR Override                 [Disabled]               ▒│                                │ │                                                                ▒│                                │ │  LTR Lock                             [Disabled]               ▒│                                │ │                                                                ▒│                                │ │► Extra Options                                                 ▼│                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI Version: 1.0 CB8283...
  • Page 57  Enabled / Disabled  Snoop Latency Override  Auto / Manual / Disabled  Non Snoop Latency Override  Auto / Manual / Disabled  Force LTR Override  Disabled / Enabled  LTR Lock  Disabled / Enabled  ► Extra Options  Submenu: Extra Options [} 59] CB8283 Version: 1.0...
  • Page 58 │                                                                 │                                │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry  Options  TC0  None  TC1  VC0 / VC1  TC2  VC0 / VC1  TC3  VC0 / VC1  TC4  VC0 / VC1  TC5  VC0 / VC1  TC6  VC1 / VC0  TC7  VC1 / VC0 Version: 1.0 CB8283...
  • Page 59 │  Reserved Memory Alignment            1                         │will take more time at Post     │ │  Prefetchable Memory Alignment        1                         │time.                           │ │                                                                 │                                │ │                                                                 ├────────────────────────────────┤ │                                                                 │→←: Select Screen               │ │                                                                 │↓↑: Select Item                 │ │                                                                 │Enter: Select                   │ │                                                                 │+/─: Change Opt.                │ │                                                                 │F1: General Help                │ │                                                                 │F2: Previous Values             │ │                                                                 │F3: Optimized Defaults          │ │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ │                                                                 │                                │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry  Options  Detect Non-Compliance Device  Disabled / Enabled  Prefetchable Memory  None  Reserved Memory Alignment  None  Prefetchable Memory Alignment  None CB8283 Version: 1.0...
  • Page 60 │  Connection Type                      [Slot]                   █│                                │ │  ASPM                                 [Disabled]               █│                                │ │  L1 Substates                         [Disabled]               █│                                │ │  ACS                                  [Enabled]                █│                                │ │  Multi─VC                             [Enabled]                █│                                │ │► VC to TC Mapping                                              █│                                │ │  PTM                                  [Disabled]               █│                                │ │  DPC                                  [Enabled]                █│                                │ │  EDPC                                 [Enabled]                █│                                │ │    URR                                [Disabled]               █│                                │ │    FER                                [Disabled]               █├────────────────────────────────┤ │    NFER                               [Disabled]               █│→←: Select Screen               │ │    CER                                [Disabled]               █│↓↑: Select Item                 │ │    SEFE                               [Disabled]               █│Enter: Select                   │ │    SENFE                              [Disabled]               █│+/─: Change Opt.                │ │    SECE                               [Disabled]               ▒│F1: General Help                │ │    PME SCI                            [Enabled]                ▒│F2: Previous Values             │ │    Hot Plug                           [Disabled]               ▒│F3: Optimized Defaults          │ │    Advanced Error Reporting           [Enabled]                ▒│F4: Save & Reset                │ │  PCIe Speed                           [Auto]                   ▒│ESC: Exit                       │ │    Transmitter Half Swing             [Disabled]               ▒│                                │ │  Detect Timeout                       0                        ▒│                                │ │  Extra Bus Reserved                   0                        ▒│                                │ │  Reserved Memory                      10                       ▒│                                │ │  Reserved I/O                         4                        ▒│                                │ │                                                                ▒│                                │ │  PCH PCIe LTR Congguration                                     ▒│                                │ │  LTR                                  [Enabled]                ▒│                                │ │    Snoop Latency Override             [Auto]                   ▒│                                │ │    Non Snoop Latency Override         [Auto]                   ▒│                                │ │    Force LTR Override                 [Disabled]               ▒│                                │ │                                                                ▒│                                │ │  LTR Lock                             [Disabled]               ▒│                                │ │                                                                ▒│                                │ │► Extra Options                                                 ▼│                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI Version: 1.0 CB8283...
  • Page 61  Enabled / Disabled  Snoop Latency Override  Auto / Manual / Disabled  Non Snoop Latency Override  Auto / Manual / Disabled  Force LTR Override  Disabled / Enabled  LTR Lock  Disabled / Enabled  ► Extra Options  Submenu: Extra Options [} 63] CB8283 Version: 1.0...
  • Page 62 │                                                                 │                                │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry  Options  TC0  None  TC1  VC0 / VC1  TC2  VC0 / VC1  TC3  VC0 / VC1  TC4  VC0 / VC1  TC5  VC0 / VC1  TC6  VC1 / VC0  TC7  VC1 / VC0 Version: 1.0 CB8283...
  • Page 63 │  Reserved Memory Alignment            1                         │will take more time at Post     │ │  Prefetchable Memory Alignment        1                         │time.                           │ │                                                                 │                                │ │                                                                 ├────────────────────────────────┤ │                                                                 │→←: Select Screen               │ │                                                                 │↓↑: Select Item                 │ │                                                                 │Enter: Select                   │ │                                                                 │+/─: Change Opt.                │ │                                                                 │F1: General Help                │ │                                                                 │F2: Previous Values             │ │                                                                 │F3: Optimized Defaults          │ │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ │                                                                 │                                │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2025 AMI  BIOS entry  Options  Detect Non-Compliance Device  Disabled / Enabled  Prefetchable Memory  None  Reserved Memory Alignment  None  Prefetchable Memory Alignment  None CB8283 Version: 1.0...

  • Page 64: Sata Configuration

    │    Software Preserve                  Unknown                  █├────────────────────────────────┤ │    Port 0                             [Enabled]                █│→←: Select Screen               │ │    Hot Plug                           [Disabled]               █│↑↓: Select Item                 │ │    Configured As eSATA                Hot Plug Supported       █│Enter: Select                   │ │    External                           [Disabled]               ▒│+/─: Change Opt.                │ │    Spin Up Device                     [Disabled]               ▒│F1: General Help                │ │    SATA Device Type                   [Hard Disk Drive]        ▒│F2: Previous Values             │ │    Topology                           [Unknown]                ▒│F3: Optimized Defaults          │ │    SATA Port 0 DevSlp                 [Disabled]               ▒│F4: Save & Reset                │ │    SATA Port 0 RxPolarity             [Disabled]               ▒│ESC: Exit                       │ │    DITO Configuration                 [Disabled]               ▒│                                │ │  Serial ATA Port 1                    Empty                    ▒│                                │ │    Software Preserve                  Unknown                  ▒│                                │ │    Port 1                             [Enabled]                ▒│                                │ │    Hot Plug                           [Disabled]               ▒│                                │ │    Configured As eSATA                Hot Plug Supported       ▒│                                │ │    External                           [Disabled]               ▒│                                │ │    Spin Up Device                     [Disabled]               ▒│                                │ │    SATA Device Type                   [Hard Disk Drive]        ▒│                                │ │    Topology                           [Unknown]                ▒│                                │ │    SATA Port 1 DevSlp                 [Enabled]                ▒│                                │ │    SATA Port 1 RxPolarity             [Disabled]               ▒│                                │ │    DITO Configuration                 [Disabled]               ▒│                                │ │  Serial ATA Port 2                    Empty                    ▒│                                │ │    Software Preserve                  Unknown                  ▒│                                │ │    Port 2                             [Enabled]                ▒│                                │ │    Hot Plug                           [Disabled]               ▒│                                │ │    Configured As eSATA                Hot Plug Supported       ▒│                                │ │    External                           [Disabled]               ▒│                                │ │    Spin Up Device                     [Disabled]               ▒│                                │ │    SATA Device Type                   [Hard Disk Drive]        ▒│                                │ │    Topology                           [Unknown]                ▒│                                │ │    SATA Port 2 DevSlp                 [Disabled]               ▒│                                │ │    SATA Port 2 RxPolarity             [Disabled]               ▒│                                │ │    DITO Configuration                 [Disabled]               ▒│                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI Version: 1.0 CB8283...
  • Page 65  Spin Up Device  Disabled / Enabled  SATA Device Type  Hard Disk Drive / Solid State Drive  Topology  Unknown / ISATA / Direct Connect / Flex / M2  SATA Port 2 DevSlp  Enabled / Disabled  DITO Configuration  Disabled / Enabled CB8283 Version: 1.0...

  • Page 66: Software Feature Mask Configuration

    ┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐ │  Software Feature Mask Configuration                            │If enabled, indicates that the  │ │                                                                 │HDD password unlock in the OS   │ │  HDD Unlock                           [Enabled]                 │is enabled.                     │ │  LED Locate                           [Enabled]                 │                                │ │                                                                 │                                │ │                                                                 │                                │ │                                                                 ├────────────────────────────────┤ │                                                                 │→←: Select Screen               │ │                                                                 │↑↓: Select Item                 │ │                                                                 │Enter: Select                   │ │                                                                 │+/─: Change Opt.                │ │                                                                 │F1: General Help                │ │                                                                 │F2: Previous Values             │ │                                                                 │F3: Optimized Defaults          │ │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry  Options  Software Feature Mask Configuration  HDD Unlock  Enabled / Disabled  LED Locate  Enabled / Disabled Version: 1.0 CB8283...
  • Page 67 └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry  Options  USB Configuration  USB3 Link Speed Selection  Gen2 / Gen1  USB Port Disable Override  Disabled / Select Per-Pin  USB Device/HOST Mode Override  Disabled / Select Per-Pin  USB USCI ACPI device  Disabled / Enabled CB8283 Version: 1.0...

  • Page 68: Hd Audio Configuration

     SSP (I2S) / HD Audio Link / SoundWire /  Advanced Link Config  HDA-Link Codec Select  Platform Onboard / External Kit  ► HD Audio Advanced Configuration  Submenu: HD Audio Advanced Configuration [} 69]  ► HD Audio DSP Features  Submenu: HD Audio Subsystem Features  Configuration Configuration (ACPI) [} 70] Version: 1.0 CB8283...
  • Page 69  Disabled / Enabled  Statically Switchable BCLK Clock  DPC Frequency Configuration:  HD Audio Link Frequency  6 MHz / 12 MHz / 24 MHz  iDisplay Audio Link Frequency  48 MHz / 96 MHz  iDisplay Audio Link T─Mode FER  2T Mode / 4T Mode / 8T Mode / 16T Mode  Autonomous Clock Stop SNDW #1  Disabled / Enabled  Autonomous Clock Stop SNDW #2  Disabled / Enabled  Autonomous Clock Stop SNDW #3  Disabled / Enabled  Autonomous Clock Stop SNDW #4  Disabled / Enabled  Data On Active Interval Select  3 / 4 / 5 / 6 clock periods  SNDW #1  Data On Active Interval Select  3 / 4 / 5 / 6 clock periods  SNDW #2  Data On Active Interval Select  3 / 4 / 5 / 6 clock periods  SNDW #3  Data On Active Interval Select  3 / 4 / 5 / 6 clock periods  SNDW #4  Data On Delay Select SNDW #1  2 / 3 clock periods  Data On Delay Select SNDW #2  2 / 3 clock periods  Data On Delay Select SNDW #3  2 / 3 clock periods  Data On Delay Select SNDW #4  2 / 3 clock periods CB8283 Version: 1.0...
  • Page 70 │   I2S Codec Select                    [Realtek ALC5660I]       █│                                │ │                                                                █│                                │ │  Audio DSP Feature Support:                                    █│                                │ │   WoV (Wake on Voice)                 [Enabled]                █│                                │ │   Bluetooth Sideband                  [Disabled]               █│                                │ │   BT Intel HFP                        [Disabled]               █│                                │ │   BT Intel A2DP                       [Disabled]               ▒├────────────────────────────────┤ │   Codec based VAD                     [Disabled]               ▒│→←: Select Screen               │ │   DSP based Speech                    [Disabled]               ▒│↑↓: Select Item                 │ │   Pre─Processinbg Disabled                                     ▒│Enter: Select                   │ │   Voice Activity Detection            [Windows 10 Voice        ▒│+/─: Change Opt.                │ │                                       Activation]              ▒│F1: General Help                │ │                                                                ▒│F2: Previous Values             │ │  Audio DSP Pre/Post─Processing                                 ▒│F3: Optimized Defaults          │ │  Module Support:                                               ▒│F4: Save & Reset                │ │   Waves Post─process                  [Disabled]               ▒│ESC: Exit                       │ │   DTS                                 [Disabled]               ▒│                                │ │   IntelSST Speech                     [Disabled]               ▒│                                │ │   Dolby                               [Disabled]               ▒│                                │ │   Waves Pre─process                   [Disabled]               ▒│                                │ │   Audyssey                            [Disabled]               ▒│                                │ │   Maxim Smart AMP                     [Disabled]               ▒│                                │ │   ForteMedia SAMSoft                  [Disabled]               ▒│                                │ │   Sound Research IP                   [Disabled]               ▒│                                │ │   Conexant Pre─Process                [Disabled]               ▒│                                │ │   Conexant Smart Amp                  [Disabled]               ▒│                                │ │   Realtek Post─Process                [Disabled]               ▒│                                │ │   Realtek Smart Amp                   [Disabled]               ▒│                                │ │   Icepower IP MFX sub module          [Disabled]               ▒│                                │ │   Icepower IP EFX sub module          [Disabled]               ▒│                                │ │   Icepower IP SFX sub module          [Disabled]               ▒│                                │ │   Voice Preprocessing                 [Disabled]               ▒│                                │ │   Custom Module 'Alpha'               [Disabled]               ▒│                                │ │   Custom Module 'Beta'                [Disabled]               ▒│                                │ │   Custom Module 'Gamma'               [Disabled]               ▼│                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI Version: 1.0 CB8283...
  • Page 71  Icepower IP EFX sub module  Disabled / Enabled  Icepower IP SFX sub module  Disabled / Enabled  Voice Preprocessing  Disabled / Enabled  Custom Module 'Alpha'  Disabled / Enabled  Custom Module 'Beta'  Disabled / Enabled  Custom Module 'Gamma'  Disabled / Enabled CB8283 Version: 1.0...
  • Page 72 │                                                                 │F2: Previous Values             │ │                                                                 │F3: Optimized Defaults          │ │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282. Copyright (C) 2024 AMI  BIOS entry  Options  Password Description  Minimum Length  None  Maximum Length  None  Administrator Password  Set an administrator password here.  User Mode available  Enabled / Disabled  Secure Boot menu  Submenu: Secure Boot [} 73] Version: 1.0 CB8283...

  • Page 73: Secure Boot

    │                                                                 │F3: Optimized Defaults          │ │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry  Options  System Mode  None  Secure Boot  Enabled / Disabled  Secure Boot Mode  Standard / Custom  ► Restore Factory Keys  Press enter key  ► Reset To Setup Mode  Press enter key  ► Key Management  Submenu: Key Management [} 74] CB8283 Version: 1.0...

  • Page 74: Key Management

     ► Platform Key(PK)  Press enter key  ► Key Exchange Keys  Press enter key  ► Authorized Signatures  Press enter key  ► Forbidden Signatures  Press enter key  ► Authorized TimeStamps  Press enter key  ► OS Recovery Signatures  Press enter key Version: 1.0 CB8283...
  • Page 75 │  Vendor Keys                          Modified                  │Delete all Secure Boot key      │ │                                                                 │databases from NVRAM            │ │  Factory Key Provision                [Disabled]                │                                │ │> Restore Factory Keys                                           │                                │ │> Reset To Setup Mode                                            │                                │ │> Export Secure Boot variables                                   │                                │ │> Enroll Efi Image                                               │                                │ │                                                                 │                                │ │  Device Guard Ready        ┌───────── Reset To Setup Mode ─────────┐                             │ │> Remove 'UEFI CA' from DB  │                                       │                             │ │> Restore DB defaults       │ Deleting all variables will reset the │                             │ │                            │         System to Setup Mode          │                             │ │  Secure Boot variable │ Siz│        Do you want to proceed?        │  ───────────────────────────│ │> Platform Key(PK)     │  86│                                       │  elect Screen               │ │> Key Exchange Keys    │ 156│───────────────────────────────────────│  elect Item                 │ │> Authorized Signatures│ 314│       Yes                  No         │  : Select                   │ │> Forbidden  Signatures│1058└───────────────────────────────────────┘  Change Opt.                │ │> Authorized TimeStamps│    0│                                         eneral Help                │ │> OsRecovery Signatures│    0│    0│ No Keys                     │F2: Previous Values             │ │                                                                 │F3: Optimized Defaults          │ │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry  Options  Vendor Keys  None  Restore To Setup Mode  see box CB8283 Version: 1.0...

  • Page 76: Enroll Efi Image

    ┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐ │  Vendor Keys                          Modified                  │Allow the image to run in       │ │                                                                 │Secure Boot mode.               │ │  Factory Key Provision                [Disabled]                │Enroll SHA256 Hash certificate  │ │> Restore Factory Keys                                           │of a PE image into Authorized   │ │> Reset To Setup Mode                                            │Signature Database (db)         │ │> Export Secure Boot variables                                   │                                │ │> Enroll Efi Image                                               │                                │ │                                                                 │                                │ │  Device Guard Ready                                             │                                │ │> Remove 'UEFI CA' from DB      ┌───────── File System ──────────┐                                │ │> Restore DB defaults           │                                │                                │ │                                │ No Valid File System Available │                                │ │  Secure Boot variable │ Size│ K│                                │  ──────────────────────────────│ │> Platform Key(PK)     │  862│  │────────────────────────────────│  : Select Screen               │ │> Key Exchange Keys    │ 1560│  │               Ok               │  : Select Item                 │ │> Authorized Signatures│ 3143│  └────────────────────────────────┘  ter: Select                   │ │> Forbidden  Signatures│10588│  22                                  ─: Change Opt.                │ │> Authorized TimeStamps│    0│    0│ No Keys                     │F1: General Help                │ │> OsRecovery Signatures│    0│    0│ No Keys                     │F2: Previous Values             │ │                                                                 │F3: Optimized Defaults          │ │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry  Options  Vendor Keys  None  Enroll Efi Image  see box Version: 1.0 CB8283...
  • Page 77 ┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐ │  Vendor Keys                          Modified                  │Restore DB variable to factory  │ │                                                                 │defaults                        │ │  Factory Key Provision                [Disabled]                │                                │ │> Restore Factory Keys                                           │                                │ │> Reset To Setup Mode                                            │                                │ │> Export Secure Boot variables                                   │                                │ │> Enroll Efi Image                                               │                                │ │                                                                 │                                │ │  Device Guard Ready                                             │                                │ │> Remove 'UEFI CA' from DB  ┌───────── Restore DB defaults ─────────┐                             │ │> Restore DB defaults       │                                       │                             │ │                            │ Press 'Yes' to proceed 'No' to cancel │                             │ │  Secure Boot variable │ Siz│                                       │  ───────────────────────────│ │> Platform Key(PK)     │  86│───────────────────────────────────────│  elect Screen               │ │> Key Exchange Keys    │ 156│       Yes                  No         │  elect Item                 │ │> Authorized Signatures│ 314└───────────────────────────────────────┘  : Select                   │ │> Forbidden  Signatures│10588│                                         Change Opt.                │ │> Authorized TimeStamps│    0│    0│ No Keys                     │F1: General Help                │ │> OsRecovery Signatures│    0│    0│ No Keys                     │F2: Previous Values             │ │                                                                 │F3: Optimized Defaults          │ │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry  Options  Vendor Keys  None  Restore DB Faults  see box CB8283 Version: 1.0...

  • Page 78: Platform Key (Pk)

    ┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐ │  Vendor Keys                          Modified                  │Enroll Factory Defaults or      │ │                                                                 │load certificates from a file:  │ │  Factory Key Provision                [Disabled]                │ 1.Public Key Certificate:      │ │> Restore Factory Keys                                           │  a)EFI_SIGNATURE_LIST          │ │> Reset To Setup Mode                                            │  b)EFI_CERT_X509 (DER)         │ │> Export Secure Boot variables                                   │  c)EFI_CERT_RSA2048 (bin)      │ │> Enroll Efi Image                                               │  d)EFI_CERT_SHAXXX             │ │                                 ┌──────────────────────────────┐│ 2.Authenticated UEFI Variable  │ │  Device Guard Ready             │    Key Exchange Keys         ││ 3.EFI PE/COFF Image(SHA256)    │ │> Remove 'UEFI CA' from DB       │──────────────────────────────││Key Source:                     │ │> Restore DB defaults            │ Details                      ││ Factory,External,Mixed         │ │                                 │ Export                       ││                                │ │  Secure Boot variable │ Size│ Ke│ Update                       ││────────────────────────────────│ │> Platform Key(PK)     │  862│   │ Append                       ││→←: Select Screen               │ │> Key Exchange Keys    │ 1560│   │ Delete                       ││↑↓: Select Item                 │ │> Authorized Signatures│ 3143│   └──────────────────────────────┘│Enter: Select                   │ │> Forbidden  Signatures│10588│  220│ Factory                     │+/─: Change Opt.                │ │> Authorized TimeStamps│    0│    0│ No Keys                     │F1: General Help                │ │> OsRecovery Signatures│    0│    0│ No Keys                     │F2: Previous Values             │ │                                                                 │F3: Optimized Defaults          │ │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.20.1282 Copyright (C) 2024 AMI  BIOS entry  Options  Vendor Keys  None  Key  Exchange Keys  see box Version: 1.0 CB8283...

  • Page 79: Authorized Signatures

                                 Security ┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐ │  Vendor Keys                          Modified                  │Enroll Factory Defaults or      │ │                                                                 │load certificates from a file:  │ │  Factory Key Provision                [Disabled]                │ 1.Public Key Certificate:      │ │> Restore Factory Keys                                           │  a)EFI_SIGNATURE_LIST          │ │> Reset To Setup Mode                                            │  b)EFI_CERT_X509 (DER)         │ │> Export Secure Boot variables                                   │  c)EFI_CERT_RSA2048 (bin)      │ │> Enroll Efi Image                                               │  d)EFI_CERT_SHAXXX             │ │                                 ┌──────────────────────────────┐│ 2.Authenticated UEFI Variable  │ │  Device Guard Ready             │    Forbidden  Signatures     ││ 3.EFI PE/COFF Image(SHA256)    │ │> Remove 'UEFI CA' from DB       │──────────────────────────────││Key Source:                     │ │> Restore DB defaults            │ Details                      ││ Factory,External,Mixed         │ │                                 │ Export                       ││                                │ │  Secure Boot variable │ Size│ Ke│ Update                       ││────────────────────────────────│ │> Platform Key(PK)     │  862│   │ Append                       ││→←: Select Screen               │ │> Key Exchange Keys    │ 1560│   │ Delete                       ││↑↓: Select Item                 │ │> Authorized Signatures│ 3143│   └──────────────────────────────┘│Enter: Select                   │ │> Forbidden  Signatures│10588│  220│ Factory                     │+/─: Change Opt.                │ │> Authorized TimeStamps│    0│    0│ No Keys                     │F1: General Help                │ │> OsRecovery Signatures│    0│    0│ No Keys                     │F2: Previous Values             │ │                                                                 │F3: Optimized Defaults          │ │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry  Options  Vendor Keys  None  Forbidden Signatures  see box CB8283 Version: 1.0...

  • Page 80: Authorized Timestamps

                                 Security ┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐ │  Vendor Keys                          Modified                  │Enroll Factory Defaults or      │ │                                                                 │load certificates from a file:  │ │  Factory Key Provision                [Disabled]                │ 1.Public Key Certificate:      │ │> Restore Factory Keys                                           │  a)EFI_SIGNATURE_LIST          │ │> Reset To Setup Mode                                            │  b)EFI_CERT_X509 (DER)         │ │> Export Secure Boot variables                                   │  c)EFI_CERT_RSA2048 (bin)      │ │> Enroll Efi Image                                               │  d)EFI_CERT_SHAXXX             │ │                                                                 │ 2.Authenticated UEFI Variable  │ │  Device Guard Ready             ┌──────────────────────────────┐│ 3.EFI PE/COFF Image(SHA256)    │ │> Remove 'UEFI CA' from DB       │    OsRecovery Signatures     ││Key Source:                     │ │> Restore DB defaults            │──────────────────────────────││ Factory,External,Mixed         │ │                                 │ Update                       ││                                │ │  Secure Boot variable │ Size│ Ke│ Append                       ││────────────────────────────────│ │> Platform Key(PK)     │  862│   └──────────────────────────────┘│→←: Select Screen               │ │> Key Exchange Keys    │ 1560│    1│ Factory                     │↑↓: Select Item                 │ │> Authorized Signatures│ 3143│    2│ Factory                     │Enter: Select                   │ │> Forbidden  Signatures│10588│  220│ Factory                     │+/─: Change Opt.                │ │> Authorized TimeStamps│    0│    0│ No Keys                     │F1: General Help                │ │> OsRecovery Signatures│    0│    0│ No Keys                     │F2: Previous Values             │ │                                                                 │F3: Optimized Defaults          │ │                                                                 │F4: Save & Reset                │ │                                                                 │ESC: Exit                       │ │                                                                 │                                │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry  Options  Vendor Keys  None  OsRecovery Signatures  See box Version: 1.0 CB8283...

  • Page 81: Quiet Boot

     Disabled / Enabled  Quiet Boot  Enabled / Disabled  Fixed Boot Order Priorities  Boot Option #1-11  Specify the order of the boot media to be used.  Advanced Fixed Boot Order Parameters  Submenu: Advanced Fixed Boot Order Parameters [} 82] CB8283 Version: 1.0...

  • Page 82: Advanced Fixed Boot Order Parameters

     Max. SSD capacity (GB)  None  Min. HDD capacity (GB)  None  Max. HDD capacity (GB)  None  Max. USB Stick capacity (GB)  None  UEFI BDS Boot Filter  Enabled / Disabled  Re-enable UEFI Disks  Enabled / Disabled  BootDeviceDef Version 3(11/22/2018)  None Version: 1.0 CB8283...

  • Page 83: Save And Exit

    └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘                   Version 2.22.1282 Copyright (C) 2024 AMI  BIOS entry  Options  Save Changes and Reset  Press enter key  Disacrd Changes and Reset  Press enter key  Restore Optimized Defaults  Press enter key  Boot Override  None  Launch EFI Shell from filesystem device  Press enter key CB8283 Version: 1.0...

  • Page 84: Bios Update

    Before a planned BIOS update, it is essential to ensure that the BIOS file to be reloaded is really released for exactly this board and for exactly this board version. If an inappropriate file is used, the board will inevitably not boot afterwards. Version: 1.0 CB8283...
  • Page 85 LEDs LEDs The LEDs for the status messages of the CB8283 motherboard are provided on the C9900-A083 LED board. This is screwed onto the housing cover. The connection to the board is made with a cable via the 4-pin connector (P100). The power supply of the board is (3.3 V). The LEDs are described from left to right.
  • Page 86 It is possible to adapt the status codes (e.g. as TwinCAT LED). To do this, the system colors can be changed with the aid of an SMB command. This change remains in force until the next restart or reset. A change of the default colors is indicated by the additional flashing of the white LED. Version: 1.0 CB8283...
  • Page 87 The LED board is supplied with a voltage of 3.3 V via a 4-pin plug. Fig. 12: Power supply LED board  Pin assignment power supply plug  Pin  Name  Description  1  3.3 V  Voltage 3.3 V +  2  SCLK  Serial Clock Signal  3  SDAT  Serial DATA Signal  4  GND  Ground CB8283 Version: 1.0...

  • Page 88: Mechanical Drawing

    Mechanical drawing 10 Mechanical drawing Dimensions Dimensions in mil, millimeters are in square brackets [mm]. 10.1 Printed circuit board: dimensions and holes Fig. 13: CB8283 MZ Version: 1.0 CB8283...

  • Page 89: Technical Data

     5 ... 9 Hz, amplitude 3.5 mm  9 to 500 Hz, 10 m/s², for packed boards Note on impact and vibration resistance The specifications for impact and vibration resistance refer only to the motherboard itself without heat sink, memory module, cabling, etc. CB8283 Version: 1.0...

  • Page 90: Thermal Specifications

    It is the end customer's responsibility to ensure that the die temperature of the processor does not exceed 110 °C! Continuous overheating can destroy the board! If the temperature exceeds 110 °C, the ambient temperature needs to be reduced. Ensure sufficient air circulation if necessary. Version: 1.0 CB8283...

  • Page 91: Appendix I: Post Codes

    Codes are explained in the document "Aptio™ 5.x Status Codes" from American Megatrends®, which is available from the website http://www.ami.com. In addition, the following OEM POST Codes are output:  Code  Description  87h  BIOS-API started  88h  PCA9535 started  89h  PWRCTRL firmware started CB8283 Version: 1.0...

  • Page 92: Appendix Ii: Resources

     00  1F  05  Controller ID A324  00  1F  06  Ethernet Controller ID 15BB  01  00  00  Ethernet Controller (PCIE) ID 1533  02  00  00  Ethernet Controller (PCIE) ID 1533  03  00  00  Ethernet Controller (PCIE) ID 1533 Version: 1.0 CB8283...

  • Page 93: Smb-Devices

     API access to power supply  36-39  Reserved  5C-5D  NCT7491  60-6F  Reserved for DDR4  70-73  POST-Code Output  88-89  Slave address defined by BIOS  A0-A7  Reserved for DDR4  B0-B3  Power controller (access via BIOS-API)  B8-BB  Power controller (access via BIOS-API) CB8283 Version: 1.0...

  • Page 94: Support And Service

    Please contact your Beckhoff branch office or representative for local support and service on Beckhoff products! The addresses of Beckhoff's branch offices and representatives round the world can be found on our internet page: www.beckhoff.com You will also find further documentation for Beckhoff components there.

  • Page 95: Trademark Statements

    ® The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc and any use of such marks by Beckhoff is under license. Intel, the Intel logo, Intel Core, Xeon, Intel Atom, Celeron and Pentium are trademarks of Intel Corporation or its subsidiaries.
  • Page 96 Beckhoff Automation GmbH & Co. KG Hülshorstweg 20 33415 Verl Germany Phone: +49 5246 9630 info@beckhoff.com www.beckhoff.com...

Table of Contents